Get Listed
Shot blasting services clean and prepare steel for painting, removing rust, scale and old coatings. PRV runs a 6 metre blast room and several blast cabinets. PRV Engineering has been trading from Pontypool, South Wales since 1986 and now runs a well equipped 54,000 sq ft facility.
The finishing department includes a 6 metre shot blast room, various shot blast cabinets, a powder coating booth, a wet paint spray room and a 2.2 metre cubic high bake oven. Specialist insulative and conductive coatings are applied by electrostatic spray, fluid bath or heat shrink. Finishes are tested in-house for gloss level, coating thickness, adhesion, porosity, colour shade, dielectric strength and insulative or conductive properties.
A finish is the first thing a customer sees and the first thing to fail if it's done badly. Surface preparation, film thickness and cure all matter. Having blasting, painting, powder coating and testing under one roof means every stage is controlled and parts don't get damaged moving between suppliers.
PRV serves a broad spread of industries including defence, medium to high voltage switchgear, rail, high performance automotive, oil and gas, pharmaceutical, petrochemical, food processing, aerospace, actuation, power generation, mechanical handling and valves. Whatever the sector, the standard is the same.
Batch size is not a problem. One-offs, pre-production runs and high volume schedules all go through the same controlled process. Materials cover the full spread from mild steel to titanium and nickel alloys, and Kanban, VMI, consignment and JIT supply can be set up for repeat lines.
PRV keeps things simple for buyers. One quote covers every process, one purchase order covers the whole job, and one team is accountable for the result. Material certificates, inspection reports and conformity paperwork are supplied as required.
One supplier, one order, one point of contact. That is the PRV promise. Every major process from cutting to final finish is done in Pontypool under ISO 9001:2015, with BS EN 1090 EXC3, ISO 14001 and ISO 45001 alongside. A continuous improvement and design for manufacture mindset means customers often end up with a better part at a lower cost.
To discuss Shot Blasting Services, send your drawings or CAD files to Enquiries@PRV-Engineering.co.uk or call the team on 01495 769697. Visits to the Pontypool facility are always welcome.
For more information on Shot Blasting Services talk to PRV Engineering Ltd