Get Listed
Deep hole drilling plate rolls creates internal passages for heating, cooling or lightening. PRV drills rolls up to 5000mm long and 4 tonnes. Established in 1986, PRV Engineering operates from a 54,000 sq ft precision engineering facility in Pontypool, South Wales.
PRV runs 10 deep hole drilling machines with a full stock of gun drills, ejector drills and counterboring heads. On non-cylindrical components, holes from 5mm to 100mm diameter can be drilled in any position at up to 3000mm centres, with workpieces up to 4 tonnes. On cylindrical parts the range is 5mm to 200mm diameter at up to 5000mm long, again up to 4 tonnes. On-site drilling is available up to 75mm diameter and 3000mm deep. Hole position, diametric tolerance, straightness and surface finish are all held tight.
Deep hole drilling is a specialist skill. Standard twist drills wander, overheat and break as holes get deeper. Gun drills and ejector drills use high pressure coolant to clear chips and keep the hole straight over depths many times the diameter. Choosing a specialist with the right tooling and experience saves scrapped parts, which on expensive forgings or bars is money well saved.
Mechanical handling equipment takes a pounding, so frames, shafts, rollers and guards have to be built properly. PRV fabricates and machines conveyor, lifting and handling components and can install them on site.
Batch size is not a problem. One-offs, pre-production runs and high volume schedules all go through the same controlled process. Materials cover the full spread from mild steel to titanium and nickel alloys, and Kanban, VMI, consignment and JIT supply can be set up for repeat lines.
PRV keeps things simple for buyers. One quote covers every process, one purchase order covers the whole job, and one team is accountable for the result. Material certificates, inspection reports and conformity paperwork are supplied as required.
Being a true one stop shop is the big advantage. A part can be cut, machined, welded, plated and painted without ever leaving the site, which cuts lead times, removes supplier handovers and keeps quality in one pair of hands. Accreditations include BS EN ISO 9001:2015, BS EN 1090 EXC3, ISO 14001, ISO 45001, Constructionline and Acclaim SSIP.
Need a price on Deep Hole Drilling Plate Rolls? Call PRV Engineering on 01495 769697 or email Enquiries@PRV-Engineering.co.uk with your drawing, quantities and material, and an experienced engineer will come back to you quickly.
For more information on Deep Hole Drilling Plate Rolls talk to PRV Engineering Ltd