Get Listed
Deep hole drilling cylinder heads produces the long coolant and oil galleries engines depend on. PRV drills heads for engine builders and rebuilders. Established in 1986, PRV Engineering operates from a 54,000 sq ft precision engineering facility in Pontypool, South Wales.
PRV runs 10 deep hole drilling machines with a full stock of gun drills, ejector drills and counterboring heads. On non-cylindrical components, holes from 5mm to 100mm diameter can be drilled in any position at up to 3000mm centres, with workpieces up to 4 tonnes. On cylindrical parts the range is 5mm to 200mm diameter at up to 5000mm long, again up to 4 tonnes. On-site drilling is available up to 75mm diameter and 3000mm deep. Hole position, diametric tolerance, straightness and surface finish are all held tight.
Deep hole drilling is a specialist skill. Standard twist drills wander, overheat and break as holes get deeper. Gun drills and ejector drills use high pressure coolant to clear chips and keep the hole straight over depths many times the diameter. Choosing a specialist with the right tooling and experience saves scrapped parts, which on expensive forgings or bars is money well saved.
Power generation plant uses big, heavy, high value parts where accuracy and reliability are everything. PRV has the large capacity machining, deep hole drilling and electrical component capability to support generation and distribution customers.
PRV works from customer drawings, specifications or OEM samples. Mild steel, stainless steel, aluminium, copper and exotic alloys are all handled, in quantities from one to full production, with call off stock available to keep your shelves lean.
The process is simple. Send a drawing, CAD model, specification or sample. PRV reviews it, flags any manufacturing concerns and quotes promptly. Once ordered, the job is planned through the relevant departments, inspected against your requirements and dispatched with the paperwork you need.
One supplier, one order, one point of contact. That is the PRV promise. Every major process from cutting to final finish is done in Pontypool under ISO 9001:2015, with BS EN 1090 EXC3, ISO 14001 and ISO 45001 alongside. A continuous improvement and design for manufacture mindset means customers often end up with a better part at a lower cost.
Need a price on Deep Hole Drilling Cylinder Heads? Call PRV Engineering on 01495 769697 or email Enquiries@PRV-Engineering.co.uk with your drawing, quantities and material, and an experienced engineer will come back to you quickly.
For more information on Deep Hole Drilling Cylinder Heads talk to PRV Engineering Ltd