Get Listed
CNC machined valve bodies need accurate bores, seats and porting to seal properly. PRV machines valve bodies in carbon steel, stainless and exotics, from single replacements to repeat batches. PRV Engineering has been trading from Pontypool, South Wales since 1986 and now runs a well equipped 54,000 sq ft facility.
The CNC department runs 30 machining centres with a wide capacity range. Turning covers components from 6mm up to 600mm diameter and over 2500mm long, while milling handles work up to 3000mm x 850mm x 750mm with true 4th and 5th axis capability at 0.001 degree resolution. Renishaw probing, helical milling, auto pallet change and laser tool break detection keep spindles cutting and parts consistent. CAD/CAM links take IGS, STP, DXF, DGN and VDA files straight to programme, so complex components get from drawing to first-off without hanging about.
When choosing a CNC machining supplier, look past the hourly rate. Ask how many machines they run, what size envelope they can handle, how they inspect, and whether they can finish the part with plating, painting or assembly. A supplier with capacity and in-house finishing will usually beat a cheaper shop on total cost, lead time and hassle. PRV ticks every one of those boxes.
Valve manufacturers need accurate bodies, stems, seats and spindles in a wide range of materials. PRV machines valve components from mild steel through to stainless and exotic alloys, in one-offs or repeat batches.
Batch size is not a problem. One-offs, pre-production runs and high volume schedules all go through the same controlled process. Materials cover the full spread from mild steel to titanium and nickel alloys, and Kanban, VMI, consignment and JIT supply can be set up for repeat lines.
PRV keeps things simple for buyers. One quote covers every process, one purchase order covers the whole job, and one team is accountable for the result. Material certificates, inspection reports and conformity paperwork are supplied as required.
One supplier, one order, one point of contact. That is the PRV promise. Every major process from cutting to final finish is done in Pontypool under ISO 9001:2015, with BS EN 1090 EXC3, ISO 14001 and ISO 45001 alongside. A continuous improvement and design for manufacture mindset means customers often end up with a better part at a lower cost.
To discuss CNC Machined Valve Bodies, send your drawings or CAD files to Enquiries@PRV-Engineering.co.uk or call the team on 01495 769697. Visits to the Pontypool facility are always welcome.
For more information on CNC Machined Valve Bodies talk to PRV Engineering Ltd