Get Listed
Abrasive waterjet cutting in South Wales from PRV uses a high pressure water and abrasive stream to slice through metals, stone, plastics and composites. Established in 1986, PRV Engineering operates from a 54,000 sq ft precision engineering facility in Pontypool, South Wales.
Cutting is done on an Idroline S 1730 hydro-abrasive waterjet with an X axis of 3000mm, Y axis of 1700mm and Z stroke of 350mm. A B axis tilt of +/-60 degrees allows bevel and 5 axis cutting, and the R axis handles tubes from 42mm to 508mm diameter, up to 2570mm long and 400kg. Because it is a cold process there is no heat affected zone, no hardening and no distortion. Narrow kerf gives excellent material yield, and many parts need no secondary finishing at all.
Laser and plasma are quick on thin mild steel, but they bring heat. That means hardened edges, distortion and changed material properties. Waterjet avoids all of that, cuts almost any material and handles thick plate that laser can't touch. For armour, hardened steel, titanium, copper, composites and anything heat sensitive, waterjet is the right call.
PRV serves a broad spread of industries including defence, medium to high voltage switchgear, rail, high performance automotive, oil and gas, pharmaceutical, petrochemical, food processing, aerospace, actuation, power generation, mechanical handling and valves. Whatever the sector, the standard is the same.
PRV works from customer drawings, specifications or OEM samples. Mild steel, stainless steel, aluminium, copper and exotic alloys are all handled, in quantities from one to full production, with call off stock available to keep your shelves lean.
The process is simple. Send a drawing, CAD model, specification or sample. PRV reviews it, flags any manufacturing concerns and quotes promptly. Once ordered, the job is planned through the relevant departments, inspected against your requirements and dispatched with the paperwork you need.
One supplier, one order, one point of contact. That is the PRV promise. Every major process from cutting to final finish is done in Pontypool under ISO 9001:2015, with BS EN 1090 EXC3, ISO 14001 and ISO 45001 alongside. A continuous improvement and design for manufacture mindset means customers often end up with a better part at a lower cost.
Need a price on Abrasive Waterjet Cutting South Wales? Call PRV Engineering on 01495 769697 or email Enquiries@PRV-Engineering.co.uk with your drawing, quantities and material, and an experienced engineer will come back to you quickly.
For more information on Abrasive Waterjet Cutting South Wales talk to PRV Engineering Ltd