TNC Plug RG58, URM43, URM76 Solder Clamp Dark Nickel Plated Greenpar

GREENPAR TNC PLUG, SOLDER CLAMP PRESSURE SLEEVE TOP HAT TERMINATION CABLE CLAMP WITH CAPTIVE CONTACTT35A70N010X99 35870C10 CABLE GROUP 010 RG58CU, RG141À/U, URM43, URM76, BELDEN 9907 - (Dark Nickel Plated) ASSEMBLY INSTRUCTIONThe TNC connector is a threaded version of the BNC connector manufactured by Greenpar Connectors. The TNC connector in usually 50 Ω impedance and operates best in the 0-11 GHz frequency spectrum. It has better performance than the BNC connector at microwave frequencies.It was commonly used by the military for radiom communication and radar applications and has been used in a wide range of radio and wired applications.The TNC CDonnector was designed in the late 1950s and named after Paul Neill of Bell Labs and Carl Concelman of Amphenol, Reverse-polarity TNC is a variation of the original TNC specification which reverses the polarity of the mating face.This is usually achieved by swaping the female contacts normally found in jacks into the plug, and the male contacts normally found in plugs into the jack. Most TNC connectors are 50-ohm type even when used with coaxial cable of other impedances, but a 75-ohm TNC connector is also available.These can be recognized by a reduced amount of dielectric in the mating ends. They are intermatable with standard 50 ohm connectors.

For more information on TNC Plug RG58, URM43, URM76 Solder Clamp Dark Nickel Plated Greenpar talk to Connectors Cables Specialists (CCS) Ltd