search

TJCR174 Connector Crimp Jack Socket RG174, RG316, LLA100, LMR100

TJCR174 Connector Crimp Jack Socket RG174, RG316, LLA100, LMR100

Product Code: TJCR174

TNC FULL CRIMP JACK FOR RG174, RG188, RG316, LLA100, LMR100 IMPEDANCE 50 OHMCRIMP TOOL PART NUMBER CR015075CABLE STRIPPING TOOL PART NUMBER CSTMIN59CABLE STRAIN RELIEF BOOTSCABLE STOCK CODE RG174CABLE STOCK CODE RG316CABLE STOCK CODE LLA100 Greenpar Equivalent T35E43J022X99Download DrawingThe TNC connector is a threaded version of the BNC connector. The TNC connector in usually 50 Ω impedance and operates best in the 0-11 GHz frequency spectrum. It has better performance than the BNC connector at microwave frequencies.It was commonly used by the military for radiom communication and radar applications and has been used in a wide range of radio and wired applications.The TNC CDonnector was designed in the late 1950s and named after Paul Neill of Bell Labs and Carl Concelman of Amphenol,Reverse-polarity TNC is a variation of the original TNC specification which reverses the polarity of the mating face.This is usually achieved by swaping the female contacts normally found in jacks into the plug, and the male contacts normally found in plugs into the jack.Most TNC connectors are 50-ohm type even when used with coaxial cable of other impedances, but a 75-ohm TNC connector is also available.These can be recognized by a reduced amount of dielectric in the mating ends. They are intermatable with standard 50 ohm connectors.

Enquiry Form



More Products

BNC Plug to SMA Jack Cable Assembly LMR240 1.0 Metre

BNC Plug to SMA Jack Cable Assembly LMR240 1.0 Metre

BNC Plug to SMA Jack Cable Assembly LMR240 1.0 MetreRoSH Compliant.

Read More
BNC Elbow Crimp Solder Male Plug RG214

BNC Elbow Crimp Solder Male Plug RG214

BNC ELBOW CRIMP SOLDER CONNECTOR RG214, LLA400, RA519, LBC400FULLY TURNED BRASS BODY AND CONTACT. NICKEL / GOLD PLATINGCRIMP TOOL REFERENCE CR01213STR...

Read More
HEATSHRINK 19/6 GLUE LINED FOR RG213, RG214, URM67 LMR400, RG8, PRE CUT TO 35MM LENGTH

HEATSHRINK 19/6 GLUE LINED FOR RG213, RG214, URM67 LMR400, RG8, PRE CUT TO 35MM LENGTH

HEATSHRINK GLUE LINED FOR RG213, RG214, URM67 SIZE CABLE, PRE CUT TO 35MM LONGDWA Size 19/6 Black Adhesive Lined Heatshrink Sleeving

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: