The Ultimate Solution for Power Floated Concrete: How UltraSlab Transforms Surface Strength and Finish

When it comes to delivering high-performance flooring, power floated concrete floor remains the go-to option for contractors seeking a smooth, dense, and durable finish. But did you know that even the best power floated floors can be significantly enhanced with the right treatment system?

Enter UltraSlab—a three-step concrete treatment solution engineered to optimise the finishing, densifying, and curing stages of power floated concrete. Whether you’re working on industrial floors, warehouses, or commercial environments, UltraSlab helps ensure your surface isn’t just strong—it’s built to last.

What Is a Power Floated Concrete Floor?

Power floated concrete is concrete that has been mechanically finished using a power float machine, which uses rotating blades to smooth and compact the surface. The result is a hard, glossy finish that’s ideal for high-traffic or heavy-load areas.

While this method already offers impressive results, the surface can still be vulnerable to:

• Dusting
• Staining
• Micro-cracking
• Inconsistent curing

That’s where UltraSlab steps in.

Why Power Floated Concrete Needs More Than Just a Smooth Finish

A flawless finish is one thing. But without proper densification and curing, power floated concrete can still suffer from premature wear, surface breakdown, or structural inconsistencies. UltraSlab addresses these challenges head-on by integrating three advanced treatments designed to enhance every stage of the concrete lifecycle.

Ultrasblab, a New Way To Finish a Concrete Floor

Here are the steps to Ultraslab that will help give unrivalled longevity to the slab.

Step 1: UltraSlab1 – Finishing Aid for Fresh Concrete Floors

Ideal for the initial finishing phase, UltraSlab1 improves the workability and surface quality of freshly laid concrete.

Perfect for Power Floated Floors Because:

• It enhances blade performance during power floating.
• Reduces the need for excess water that can weaken the slab of the concrete floor.
• Helps prevent common defects like crusting and crazing.
• Maintains consistency in eco-friendly mixes such as Type 1L concrete.

Step 2: UltraSlab+ – High-Performance Densifier

UltraSlab+ is a lithium and potassium silicate densifier engineered to react with the calcium hydroxide in hardened concrete, forming a denser, more abrasion-resistant surface.

Ideal for Power Floated Concrete Because:

• It increases hardness and long-term durability of your concrete floor.
• Locks in fine particles, reducing dusting and surface wear.
• Requires no scrubbing or rinsing—apply and go.
• Enhances appearance with a refined, low-sheen finish.

Step 3: UltraSlabC – One-Step Cure and Densify Solution

Freshly floated concrete needs to cure properly to avoid inconsistent hydration and surface defects. UltraSlabC combines curing and densifying in one simple spray-on application.

The Benefits for Power Floated Concrete Floors:

• Meets ASTM C309 and C156 standards.
• Fast-drying—ready in 60 minutes.
• Reduces blotchiness in integrally coloured concrete.
• Helps maintain surface uniformity and prevents early-age staining.

Real-World Results: For a Stronger, Smarter Concrete Floor

When UltraSlab+ and UltraSlabC are used together, testing shows up to 60% improvement in abrasion resistance—a game-changer for floors that endure forklifts, trolleys, or frequent footfall.

This means:

 Reduced maintenance
 Longer-lasting finish
 Better value over time

How to Power Float Concrete Floors with UltraSlab

To achieve maximum performance from your power floated concrete floor, follow this step-by-step process using the UltraSlab system:

 Step 1: Prepare and Pour

Pour your concrete as normal.

Strike off and level the slab to remove excess concrete.

 Step 2: Apply UltraSlab1 During Initial Finishing

Once bleed water has evaporated but before floating begins, spray UltraSlab1 evenly using a pump-up sprayer (typically 5–10 m²/L).

Allow a few minutes for it to absorb and begin working.

Start the power floating process—UltraSlab1 will lubricate the surface and extend finishing time, especially in hot or windy conditions.

 Step 3: Densify with UltraSlab+

Once the slab is hardened and can be walked on (usually the next day), apply UltraSlab+ with a sprayer.

Distribute evenly and work into the surface with a soft microfiber pad or broom.

Let it dry naturally—no scrubbing or rinsing required.

 Step 4: Cure with UltraSlabC

For slabs requiring curing and densification in one step, apply UltraSlabC instead of UltraSlab+.

Spray evenly on the power floated surface immediately after finishing.

Allow to dry (approx. 60 minutes). It forms a temporary film that assists hydration and locks in strength.

Conclusion: Power Floated Concrete Deserves UltraSlab

Power floated concrete may already offer a great finish—but with UltraSlab, you elevate that finish to the next level. From enhanced strength to long-term protection, UltraSlab ensures your floors aren’t just built beautifully, but built to endure.

Interested in learning more or placing an order?

 Contact us today or explore the UltraSlab range at Smart Floor UK

Strength Starts at the Surface

For more information on The Ultimate Solution for Power Floated Concrete: How UltraSlab Transforms Surface Strength and Finish talk to Smartfloor UK