Reduce Cost With In-situ Safety Valve Testing

In-situ Safety Valve Testing To get the true set point, use Seetru's Tru-test®. Plant maintenance departments and responsible engineers are looking for innovative and time saving methods for safety valve maintenance, testing and certification. Seetru can assist you in this process by streamlining your maintenance schedules Removal of valves and interruptions in production are both costly and labour intensive, they also create a logistics headache for the maintenance scheduler. Our In-situ PSV test system completely negates these costs and issues. Employing our fully trained and certified safety valve technicians along with our In-situ testing system to certify your safety valves, provides you with complete confidence in valve operation and set point in the installed environment. All the leading insurance companies and the Safety Advisory Federation (SAFed) have approved our Tru-test® system as a fully acceptable method for periodic certification of safety and relief valves. Seetru Engineering Services offer efficient services: Providing a quality service by ensuring accurate set points. Only physical access to the valve requires your attention. We are available at short notice. Equipment is tested and calibrated before we come to your site. And, if required, it can be further calibrated and witnessed by your inspector at the point of work. What is Tru-testing®? Our Tru-test equipment connects to the spindle of the safety valve and hydraulically assists the valve to overcome the spring tension therefore, slightly lifting the disc from the seat; the point of disc movement is the critical requirement for correctly determining the valve set point. We only need to remove the valve cap to connect our equipment. The system pressure (which requires accurate measurement) does not require depressurisation; therefore your system can continue to run normally unaffected by our testing. The valve is minutely opened for a fraction of a second and could be assisted to close if the valve should remain open. Manufacturers' valve data gives us the sealing area required to enable accurate calculation of set pressure from spindle force measurement. The system measures the set point at the first point of lift by a highly accurate and sensitive lift transducer. This set point can then be readjusted (if required). For additional information, a site visit or a survey why not test our passion about our expertise and commitment to service. Seetru Engineering Services - Redefining Maintenance Standards Bristol Workshop (Head Office) Tel: 0117 930 6148 Email: ses@seetru.com Albion Dockside Works, Hanover Place, Bristol, BS1 6UT Stockton-On-Tees Workshop Tel: 01642 625 904 Email: jill.peacock@seetru.com Unit 4, Navigator Court, Preston Farm Industrial Estate, Stockton-On-Tees, TS18 3TQ, England

For more information on Reduce Cost With In-situ Safety Valve Testing talk to Seetru Ltd