Puravent

AW DX22 11.1 kw fan heater/ 9.2kw fan cooler

Product Code: 421402-1

Skip to the end of the images gallery Previous Next12 Reset Skip to the beginning of the images gallery Details The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc. Can be combined with outdoor units made by various manufacturers and their control equipment accessories. • Designed for heating and cooling. • Condensation insulation between coil and casing. • 4 mm fin spacing minimises maintenance, even in dusty surroundings. • Hydrophilic coated fins for optimum condensation run-off. • Stainless steel condensation trough, with condensation insulation underneath. • Adjustable deflectors to control height of air flow. • Snap lock cover to connect transmitter on coil. • Snap lock cleaning cover. • Protection class IP44 - splash-resistant Design The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant). Controls AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed. Type AW DX22 Power supply 230V Cosumption A 0.60 Air volume m3/h 2000 Sound pressure level dB(A) 52 Max. operating pressure bar 4.15 Inner volume coil I 2.3 Pipe connection cooling pipe, liquid/gas 3/8" - 5/8" Condensation drain G1/2" Max. ambient temperature °C 40 Coolant R410A Protection class IP44 Weight kg 48 The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc. Can be combined with outdoor units made by various manufacturers and their control equipment accessories. • Designed for heating and cooling. • Condensation insulation between coil and casing. • 4 mm fin spacing minimises maintenance, even in dusty surroundings. • Hydrophilic coated fins for optimum condensation run-off. • Stainless steel condensation trough, with condensation insulation underneath. • Adjustable deflectors to control height of air flow. • Snap lock cover to connect transmitter on coil. • Snap lock cleaning cover. • Protection class IP44 - splash-resistant Design The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant). Controls AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed. Type AW DX22 Power supply 230V Cosumption A 0.60 Air volume m3/h 2000 Sound pressure level dB(A) 52 Max. operating pressure bar 4.15 Inner volume coil I 2.3 Pipe connection cooling pipe, liquid/gas 3/8" - 5/8" Condensation drain G1/2" Max. ambient temperature °C 40 Coolant R410A Protection class IP44 Weight kg 48 The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc. Can be combined with outdoor units made by various manufacturers and their control equipment accessories. • Designed for heating and cooling. • Condensation insulation between coil and casing. • 4 mm fin spacing minimises maintenance, even in dusty surroundings. • Hydrophilic coated fins for optimum condensation run-off. • Stainless steel condensation trough, with condensation insulation underneath. • Adjustable deflectors to control height of air flow. • Snap lock cover to connect transmitter on coil. • Snap lock cleaning cover. • Protection class IP44 - splash-resistant Design The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant). Controls AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed. Type AW DX22 Power supply 230V Cosumption A 0.60 Air volume m3/h 2000 Sound pressure level dB(A) 52 Max. operating pressure bar 4.15 Inner volume coil I 2.3 Pipe connection cooling pipe, liquid/gas 3/8" - 5/8" Condensation drain G1/2" Max. ambient temperature °C 40 Coolant R410A Protection class IP44 Weight kg 48 The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc. Can be combined with outdoor units made by various manufacturers and their control equipment accessories. • Designed for heating and cooling. • Condensation insulation between coil and casing. • 4 mm fin spacing minimises maintenance, even in dusty surroundings. • Hydrophilic coated fins for optimum condensation run-off. • Stainless steel condensation trough, with condensation insulation underneath. • Adjustable deflectors to control height of air flow. • Snap lock cover to connect transmitter on coil. • Snap lock cleaning cover. • Protection class IP44 - splash-resistant Design The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant). Controls AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed. Type AW DX22 Power supply 230V Cosumption A 0.60 Air volume m3/h 2000 Sound pressure level dB(A) 52 Max. operating pressure bar 4.15 Inner volume coil I 2.3 Pipe connection cooling pipe, liquid/gas 3/8" - 5/8" Condensation drain G1/2" Max. ambient temperature °C 40 Coolant R410A Protection class IP44 Weight kg 48 The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc. Can be combined with outdoor units made by various manufacturers and their control equipment accessories. • Designed for heating and cooling. • Condensation insulation between coil and casing. • 4 mm fin spacing minimises maintenance, even in dusty surroundings. • Hydrophilic coated fins for optimum condensation run-off. • Stainless steel condensation trough, with condensation insulation underneath. • Adjustable deflectors to control height of air flow. • Snap lock cover to connect transmitter on coil. • Snap lock cleaning cover. • Protection class IP44 - splash-resistant Design The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant). Controls AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed. Type AW DX22 Power supply 230V Cosumption A 0.60 Air volume m3/h 2000 Sound pressure level dB(A) 52 Max. operating pressure bar 4.15 Inner volume coil I 2.3 Pipe connection cooling pipe, liquid/gas 3/8" - 5/8" Condensation drain G1/2" Max. ambient temperature °C 40 Coolant R410A Protection class IP44 Weight kg 48 The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc. Can be combined with outdoor units made by various manufacturers and their control equipment accessories. • Designed for heating and cooling. • Condensation insulation between coil and casing. • 4 mm fin spacing minimises maintenance, even in dusty surroundings. • Hydrophilic coated fins for optimum condensation run-off. • Stainless steel condensation trough, with condensation insulation underneath. • Adjustable deflectors to control height of air flow. • Snap lock cover to connect transmitter on coil. • Snap lock cleaning cover. • Protection class IP44 - splash-resistant Design The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant). Controls AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed. Type AW DX22 Power supply 230V Cosumption A 0.60 Air volume m3/h 2000 Sound pressure level dB(A) 52 Max. operating pressure bar 4.15 Inner volume coil I 2.3 Pipe connection cooling pipe, liquid/gas 3/8" - 5/8" Condensation drain G1/2" Max. ambient temperature °C 40 Coolant R410A Protection class IP44 Weight kg 48 The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc. Can be combined with outdoor units made by various manufacturers and their control equipment accessories. • Designed for heating and cooling. • Condensation insulation between coil and casing. • 4 mm fin spacing minimises maintenance, even in dusty surroundings. • Hydrophilic coated fins for optimum condensation run-off. • Stainless steel condensation trough, with condensation insulation underneath. • Adjustable deflectors to control height of air flow. • Snap lock cover to connect transmitter on coil. • Snap lock cleaning cover. • Protection class IP44 - splash-resistant Design The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant). Controls AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed. Type AW DX22 Power supply 230V Cosumption A 0.60 Air volume m3/h 2000 Sound pressure level dB(A) 52 Max. operating pressure bar 4.15 Inner volume coil I 2.3 Pipe connection cooling pipe, liquid/gas 3/8" - 5/8" Condensation drain G1/2" Max. ambient temperature °C 40 Coolant R410A Protection class IP44 Weight kg 48 The AW DX is used with an outdoor unit to heat and cool various rooms. Ideal for use in industrial premises, warehouses, sports halls, shops etc. Can be combined with outdoor units made by various manufacturers and their control equipment accessories. • Designed for heating and cooling. • Condensation insulation between coil and casing. • 4 mm fin spacing minimises maintenance, even in dusty surroundings. • Hydrophilic coated fins for optimum condensation run-off. • Stainless steel condensation trough, with condensation insulation underneath. • Adjustable deflectors to control height of air flow. • Snap lock cover to connect transmitter on coil. • Snap lock cleaning cover. • Protection class IP44 - splash-resistant Design The casing is made of galvanised, white-painted steel plate. Coil with copper pipes and hydrophilic-plated aluminium fins. Fin spacing 4 mm to minimise dust and particles clogging up the coil. Ball bearing-mounted fan motor with thermal protection gives low noise and safe operation. Condensation drain with G½" connection. Connected to outdoor unit by soldering. Available in two sizes, complete with wall bracket. Protection class IP44 (splash-resistant). Controls AW DX has no automated control system and has to be controlled by the outdoor unit and its control equipment. AW DX has a single fan speed. Type AW DX22 Power supply 230V Cosumption A 0.60 Air volume m3/h 2000 Sound pressure level dB(A) 52 Max. operating pressure bar 4.15 Inner volume coil I 2.3 Pipe connection cooling pipe, liquid/gas 3/8" - 5/8" Condensation drain G1/2" Max. ambient temperature °C 40 Coolant R410A Protection class IP44 Weight kg 48 Out of stock Additional Details Additional Details Delivery Dependant on stock availability. Check with us before ordering Brand Veab Warranty 1 year warrenty in compliance with ORGALIME S2000

For more information on AW DX22 11.1 kw fan heater/ 9.2kw fan cooler talk to Puravent