We are now accepting tender applications for our LABORATORY EXPANSION

Simulated Environment Testing Facility

Job Ref: ESIM

Value: £150,000

Planned Start Date: March 2021

Planned Finish Date: July 2021

Tenders invited until 8th Jan 2021

This project is to provide a 2 storey building extension to the existing premises at Cranage EMC Testing Ltd, Tern Valley Business Park, Market Drayton, Shropshire, TF9 3AG.

Please forward your quotation based on the following outline specification to Alternatively, please call 01630 658568 to speak to Keith or to arrange an appointment to visit.


Width of building -10m mono pitch

Length of building - 20m, made up of 4 x bays at 5m

Eaves height - 7m, falling to 6m (6 degree pitch)

Complete with a single storey link attached building, with a mono pitch roof (6 degree), 2.5m (w) x 3m (l) x 2.4m (h)


CE compliant, galvanised steelwork, zinc phosphate primed, tubular bracings as required


Wall cladding, sides and gables, to finished floor level: Kingspan KS1000MR 80mm Black composite Micro Rib panels 1m height

Roof area: Kingspan KS1000RW 115mm composite panels to include triple skin GRP lights

Black Plastisol coated steel flashings and guttering to match existing building


1 off electrical insulated sectional door, 3-phase, grey colour: 3.5m(W) x 4m(H) located gable end elevation

2 off personnel door, high standard, grey colour: 1m(W) x 2.1m(H) located link attached walkway (staff entrance/exit) and gable end (fire escape)

Mezzanine Floor

Approx. 175m2 area, with open access from ground floor level at sectional door end of the building (see drawing) – no allowance to be made for any balustrade.

Cold rolled joists along with P6 chipboard to the whole mezzanine area. Staircase at each end to be supplied.


Site is level, and requires 450mm excavation to the footprint of the building including attached link building. Install concrete pad foundations

Provide and lay 200mm consolidated sub-base

Provide and lay RC35 concrete floor slab to depth of 200mm on 1200 gauge polythene, with 100mm Celotex insulation on a membrane complete with 1 layer A252 fabric reinforcement.

Float finish concrete floor slab.

No allowance to be made for site removal of excavated material.

Tenders to be itemised with costs as follows:-

Groundworks and Foundations

Supply and Construction

Tenders shall be evaluated subject to the following criteria:-

Price: 60% Quality: 40%

Public liability insurance, and adherence to health and safety at work on construction sites are mandatory requirements. Tenders will be rejected if suppliers do not meet the minimum requirements.

For more information on  LABORATORY EXPANSION  talk to  Cranage EMC & Safety

Enquiry Form

More News

Why do I need EMC Testing?

Why do I need EMC Testing?

Electromagnetic Compatibility, or EMC, is the ability of an electrical or electronic item to perform as intended in its environment without interferin...

Read More
New facilities for Damped Oscillatory Wave

New facilities for Damped Oscillatory Wave

Cranage EMC & Safety expands its facilities for Damped Oscillatory Wave Immunity Testing at 100kHz & 1MHz to include Fast Waves at 3, 10 & 30MHz cause...

Read More
Cranage EMC and Safety- Worldwide product safety services

Cranage EMC and Safety- Worldwide product safety services

Cranage EMC and Safety offers a complete range of testing, conformity and supporting services to be able to help manufacturers gain access to global m...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Office Address: