search

Safety Barriers

Safety Barriers
07/01/2022

Pedestrian Safety Barriers A Barrier System designed to create safe pedestrian areas both on ground and on mezzanine floors.

The barrier is a safety feature to prevent personnel walking into restricted areas, where there may be dangerous machinery.

The handrails are bolted directly to the posts with M8 x 60mm bolts, the posts are bolted to a concrete floor with M12 Anchor bolts. M12 Bolts and nuts are used if attached to chipboard such as used on a mezzanine floors.

Technical Information

Standard Height: 900mm, 1100mm and 1500mm Standard Width: Depends on customers requirements Barrier Rail: 40mm x 40mm x 3mm RHS Vertical Posts: 40mm x 40mm x 3mm RHS Base Plates: 100mm x 180mm x 120mm drilled to accept a M12 Anchor Bolt Corner Posts: 40mm x 40mm x 3mm RHS Standard Colour Finishes: Yellow RAL 1018, Grey BS00A05 and Sandstone BS08B17 Construction: Vertical posts are rolled steel hollow section mig welded to heavy base plates. Corner posts and rails are rolled steel hollow section with plastic end caps for all exposed ares.

We offer a full fitting service on all our products.

Double Safety Barrier System A light Duty Protective barrier system designed to protect racking, shelving and partitioning in warehouses from damage caused by forklift trucks, pallet trucks etc. The system can be upgraded to medium duty by using the double barrier railed system. The system rails are produced from pre -galvanised material and they also have high visibility end caps to help determine the end of the barrier rails. The barrier rails are mounted directly to the posts, which in turn are fixed to floor with M12 Anchor bolts.

Technical Information

Standard Length: 3000mm Standard Height: 600mm Barrier Rails: 150mm x 40mm x 3mm x 3000mm long Posts: 80mm x 40mm x 3mm x 60mm long Base Plates: 120mm x 140mm x 10mm Corner Posts: 75mm x 75mm x 6mm x 600mm high Standard Finishes: Galvanised, Yellow RAL 1018, Grey BS00A05 and Sandstone BS08B17 Construction: Vertical posts are rolled steel hollow section mig welded to heavy base plates. Corner posts and rails are rolled steel hollow section with plastic end caps for all exposed ares.

We offer a full fitting service on all our products.

For more information on  Safety Barriers  talk to  Billington Safety Systems Ltd

Enquiry Form



More News

Storage Cages & Mesh Cages

Storage Cages & Mesh Cages

Are you looking to Create a Storage Cage or Mesh Enclosure? Then look no further than our Storage Enclosure systems, we have a wide variety of solutio...

Read More
Mesh Security Cages & Mesh Partitioning

Mesh Security Cages & Mesh Partitioning

We have recently installed a number of mesh cages which will be used as security cages for storing high valued goods in, these are made and designed t...

Read More
Double Skin Partitioning

Double Skin Partitioning

Our double skin steel partition system gives a smooth finish to both sides of the partition, with minimal joints, ideally suited to works offices, cle...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: