Testec TT-SX-9001 Active Differential Probe 30MHz x10/x100

Testec TT-SX-9001 Active Differential Probe 30MHz x10/ x100 The Testec TT-SX-9001 x10/ x100 Differential Probe extends the measurement capability of standard earth ground oscilloscopes to measure floating signals up to 700V. These applications include testing and measuring electronic power converters, inverters, motor speed controls, switch mode power supplies, and many other applications including testing components within an Electric or Hybrid vehicle. This active probe can be used with any oscilloscope that has a 1 MΩ BNC female input and features up to 30 MHz of bandwidth. The probe can be powered by any oscilloscope USB port, internal batteries (4 AA batteries, not included), or mains power adapter. Features: Bandwidth: DC 30MHz Attenuation: x10 / x100 Accuracy: �2% Input impedance: 5 MΩ, 2 pF (each side to ground) Measurement Category: 1000V CAT III Rise Time: 14 nS Input Voltage: Differential Mode (DC + peak AC): x10 �70V or 70 Vrms, x100 �700V or 700 Vrms Common mode (DC + peak AC): x10 �70V or 70 Vrms, x100 �700V or 700 Vrms Absolute max (each side to ground): 1000V CAT III Output Voltage: Output Voltage �7 V (driving 1 MΩ load) Offset (typical) �20 mV Noise (typical) 0.7 mVrms CMRR (typical) 50 Hz: -72 dB 20 kHz: -66 dB 200 kHz: -56 dB Environmental Specs: Operating Temperature -10�C to 40�C (14�F to 104�F) Storage Temperature -30�C to 70�C (-22�F to 158�F) Humidity ? 80% RH @ 25�C to 35�C (77�F to 95�F) Altitude Operating: 2000 m Non-operating: 15000 m Pollution Degree 2 Included in supply: 1 x TT-SX GR 1 Probe Hook, Pair (red & black) 1 x TT-SX USB Power Cord Mechanical Specs Input Leads Length (each) 55 cm �3 cm BNC Cable Length 95 cm �3 cm Dimension (L x W x H) 220 mm, 68 mm, 28 mm (with protective Weight rubber boot) 488 g (1.08 lb) (with batteries and protective rubber boot) USB Type C Cable Length 100 cm �3 cm

For more information on Testec TT-SX-9001 Active Differential Probe 30MHz x10/x100 talk to Warwick Test Supplies Ltd