Responsive Wireless I/O

Responsive Wireless Telemetry is here!!! Traditionally radio networks follow the Master and Slave methodology for data acquisition whereby a master polls the data from a slave. This method is inefficient and if the master fails, the network fails. To overcome this the Omniflex Teleterm M3 Series uses peer to peer technology combined with a host of other features to provide responsive wireless telemetry with the following advantages:- All Out Stations report automatically when they need to. i.e. Change of State or Set Limits reached Faster more efficient reporting and better Control Reduced Radio Noise Fail Over Options for redundancy Bi Directional Signals Repeating capability for longer range Teleterm M3 Series uses licence-free radio bands and is suitable for up to 15 km range. Connect directly to Scada or DCS via Ethernet. The system is ideal for short hop radio links such as:- Reservoir Monitoring Tank Gauge Monitoring Remote Pump Control Dam Levels Plant Utilities Reporting (Water, Air, Gas, Steam, Electricity) Plant Condition Monitoring Maximum I/O Flexibility – Mixed Inputs and Output Signals Each Wireless Node allows any mix of 12 Configurable I/O:- Digital Input Digital Output Analogue Input Analogue Output Programmable in IEC61131 5 Languages Each Node can be programmed as a PLC or just used as a Data Acquisition node. Benefits include:- Low Cost Implementation and cable saving No Master Station required so no polling each outstation Peer to Peer Communication simplifies point to point plant communications Change of state(digital) trigger or cyclic(analogue) for communications The network traffic is kept low so that only important data is transmitted. These above benefits make it ideally suited for data acquisition.

For more information on Responsive Wireless I/O talk to Omniflex UK Limited