About us

Novatech Measurements Limited

If you are looking for a solution to a force measurement problem you need look no further than Novatech. We promise our involvement in your project to what ever degree you require. Our experienced team will strive to arrive at the optimum solution for your problem. Our delivery times are probably the shortest in Europe and we prefer to deal direct with the end user wherever you are based in the world. This ensures that the application receives the best technical consideration right from the start of a project when the correct choice of loadcell is essential for successful force measurement.

Novatech offers over 30 years of manufacturing experience, the latest analytical techniques and a flexible approach. We have total in-house design, production and calibration capabilities. All of our resources are dedicated to product integrity.

Our market strength is our unique ability to quickly produce custom designed solutions to problems at reasonable costs. The design process normally starts from a concept or a problem definition. We never promise the impossible and promote performance integrity as paramount. Occasionally we push forward the frontiers of loadcell technology, usually driven by customer demands.

The loadcells that we manufacture are sensors that convert a force into a linear electrical signal. Their operation relies on measuring minute movements in a precision metal structure using foil strain gauges bonded to the surface of the metal. The structure takes a wide variety of forms depending on the force range and the application requirements. The loadcell goes by a wide variety of names including load cell, force sensor, shear beam, bending beam, loadwasher, load pin and shearpin. Some of the names identify the type of structure used to construct the sensor. A number of the names may be written as either one or two words e.g. loadcell or load cell, shearbeam or shear beam, shearpin or shear pin. There is no ‘correct’ way of writing them; it is a matter of personal preference. We also manufacture static torque sensors and multi-axis force sensors using the same basic methods.

The main thing to remember is that if you have any sort of force or static torque measurement requirement we can help you to find the best sensor for the job. To discuss your requirements contact us using any of the methods listed below. You can see more information about the wide range covered by our products in our Company Profile.

To support the loadcells and force sensors we also supply a range of basic instrumentation including loadmeters and loadcell amplifiers.

We also operate a loadcell hire service. See our hire website at www.loadcellhire.co.uk for details.

Data-sheets are available for our standard loadcells, loadmeters and loadcell amplifiers. They can be accessed via the Products page. The main pages have a 'Home' button to return you to this page. All the product information pages have issue dates in the bottom left hand corner showing when they were last updated. If you are a regular visitor the News Page will keep you up to date with the latest developments.

Current prices for all our the products can be obtained from our sales department. We are happy to provide written quotations for your requirements. Quotations are usually sent within 24 hours. All orders are subject to our General Conditions of Sale.

Please contact our engineering department for confirmation of critical dimensions before designing mountings or fittings.


Products

Axial Compensated Loadcell

Axial Compensated Loadcell

High accuracy IP65 sealing option Misalignment error compensation Standard 2 year warranty Integral overload protection option Geomet...

Read More
Binocular Bending Beam

Binocular Bending Beam

Tension / compression / bi-directional calibration Easy installation Small size single point loadcell Standard 2 year warranty All aluminium c...

Read More
Column Loadcell

Column Loadcell

Hardened stainless steel body Low profile Sealed to IP65 Bottom or side cable entry Standard 2 year warranty Geometry: Small column i...

Read More
Custom Static Torque Transducer

Custom Static Torque Transducer

We can manufacture static torque transducers with ranges between 2Nm and 1000Nm to your specific requirements. For lower ranges please see the F315. I...

Read More
Donut Loadcell

Donut Loadcell

Hardened stainless steel body Sealed to IP65 Very high structural load limit Tensile applications are ‘fail-safe’ Standard 2 year warranty ...

Read More
Fatigue Rated Pancake Loadcell

Fatigue Rated Pancake Loadcell

Tension / compression / bi-directional calibration Low profile Custom modifications to suit your application Sealed to IP65 Hardened stainless...

Read More
Gear Shift Loadcell

Gear Shift Loadcell

Gear lever actuation forces measured in 3 axes User friendly pure calibrated outputs for each axis Designed for hand or robotic actuation In car...

Read More
Handbrake Loadcell

Handbrake Loadcell

Low profile with finger grip Precise measurement with uneven load distribution Good extraneous load rejection Force measurement unaffected by ha...

Read More
High Load Ultra Low Profile Loadcell

High Load Ultra Low Profile Loadcell

Ultra low profile Fail-safe failure mode Hardened stainless steel IP67 sealing option Standard 2 year warranty Geometry: Ultra low pr...

Read More
Integral Loadcell Amplifier

Integral Loadcell Amplifier

This loadcell amplifier is designed for mounting inside the F256 and F257 loadcells. It is available in three versions, 2 wire 24V powered, 3 wire 12V...

Read More
Intelligent Loadcell Amplifier

Intelligent Loadcell Amplifier

Auto calibration Remote tare, printer and reset inputs 4 to 20mA and 0 to 10V output as standard ABS case sealed to IP65 Password protection o...

Read More
Intelligent Loadmeter

Intelligent Loadmeter

Auto calibration Tare, net and gross keys 4 to 20mA and 0 to 10V output as standard ABS case sealed to IP65 Password protection of calibration...

Read More
Load Washer

Load Washer

Low profile with centre hole Ranges to suit bolt sizes from M6 to M36 Stainless steel construction Tensile applications are ‘fail-safe’ Standa...

Read More
Loadcell Amplifier

Loadcell Amplifier

Small size 4 to 20mA, ±5V or ±10V output 5 or 10Vdc stabilised loadcell supply Low zero drift 1kHz bandwidth (-3dB) This loadcell amp...

Read More
Loadcell Amplifier SY018

Loadcell Amplifier SY018

DIN rail mounted 4 to 20mA or ±10V output 17 to 30Vdc supply range Protected against reverse supply connection 5kHz bandwidth (-3dB) ...

Read More
Loadstud

Loadstud

Hardened stainless steel body Compact ‘in line’ installation Small diameter Low cost Standard 2 year warranty Geometry: Axial strain ...

Read More
Low Cost Axial Force Sensor

Low Cost Axial Force Sensor

Low profile Sealed to IP65 Low cost Hardened stainless steel Standard 2 year warranty The F303 is aimed at the volume OEM user who requ...

Read More
Low Profile Corner Scales

Low Profile Corner Scales

Low profile for easy access Lightweight yet rugged design for long service life Corrosion resistant Custom versions available Used by most For...

Read More
Low Profile Diaphragm Loadcell

Low Profile Diaphragm Loadcell

Very low profile Universal fixing Hardened stainless steel Sealed to IP65 Standard 2 year warranty Geometry: Low profile axial loadce...

Read More
Low Range Disc Type Static Torque Transducer

Low Range Disc Type Static Torque Transducer

Custom torque ranges Symmetrical outputs Easy installation Standard 2 year warranty Geometry: Slender disc, with outer ring earth fixing ...

Read More
Miniature Diaphragm Loadcell

Miniature Diaphragm Loadcell

Tension / compression / bi-directional calibration Easy installation 15mm diameter Hardened stainless steel construction Standard 2 year warra...

Read More
Multi-Axis Loadcell

Multi-Axis Loadcell

2 & 3 axis versions Custom force ranges Simple installation Direct output from each axis without calculation Standard 2 year warranty ...

Read More
Pancake Loadcell

Pancake Loadcell

Tension / compression / bi-directional calibration Compact size Low deflection Hardened stainless steel body Standard 2 year warranty ...

Read More
Shear Beam Loadcell

Shear Beam Loadcell

Hardened stainless steel construction Sealed to IP65 Mounting assemblies available Output rationalised to 2mV/V Standard 2 year warranty ...

Read More
Three Axis Loadcell

Three Axis Loadcell

Direct output from each axis without calculation Good output symmetry simplifies instrumentation calibration Simple installation High overload c...

Read More
Universal Loadcell

Universal Loadcell

Large internal interfacing threads High structural load limit Flying lead or connector option Sealed to IP65 Standard 2 year warranty

Read More
Weight Platforms

Weight Platforms

We manufacture a range of low profile platform scales, type W275 and W277, with full load ranges between 100kg and 4000kg. These are widely used in Fo...

Read More

27 Products

News

There is nothing listed here for this company

0 News

Jobs

There is nothing listed here for this company

0 Jobs

Documents

There is nothing listed here for this company

0 Documents

Videos


        

There is nothing listed here for this company

Social Media

Contact Us

Novatech Measurements Limited

  • 83 Castleham Road
  • St Leonards on Sea
  • East Sussex
  • TN38 9NT

Page view stats for Novatech Measurements Limited

Click-through stats for

Hide Statistics

Enquiry Form