search

Scalability of Metso's award-winning HRC technology confirmed in pilot testing in Chile

Scalability of Metso's award-winning HRC technology confirmed in pilot testing in Chile
31/12/2017

Scalability of Metso's award-winning HRC technology confirmed in pilot testing in Chile

Metso Corporation's press release on November 2, 2017 at 3:00 p.m. EET

The scalability of Metso's HRCTM high-pressure grinding technology has successfully been proven in pilot tests. The tests were conducted at a customer pilot plant in Chile during 2016 and 2017. Following the success of the pilot, similar projects will be operational in the near future.

When designing a plant expansion project, it is important to go beyond laboratory tests to confirm that the selected technology is optimal for the process in question. Convinced by the excellent results of Metso's award-winning HRCTM technology and impressive operational results in the USA, several customers have expressed their desire to see whether Metso's HRC solutions would also suit their growing production and scalability needs.

Caption: Piloting Metso HRC technology in Chile.

The pilot confirmed that the HRC 800 high-pressure grinding roll fulfills the expected capacity requirements for the application, and that the scale factor defined by Metso in the laboratory environment proved to be correct, independent of the ore type. Based on the results, Metso's modeling and simulation was proven, and the necessary equipment for the customer's plant expansion was specified.

"HRC high-pressure grinding represents a significant technological leap for the mining industry, and thus the results of the scalability pilot are extremely valuable. We were able to verify our hypothesis and meet the customers' expectations 100 percent. We look forward to continuing with the inquiries received concerning this Metso innovation," says Raúl Noriega, Capital Equipment Sales Manager at Metso in Chile.

Further projects in pipeline with this cost-saving technology HRC technology is a higher-performance alternative to conventional high-pressure grinding rolls. Based on the pilot tests, it enables savings on operational expenses of 10 to 20 percent, depending on the ore type. The pilot plant where the technology was tested processed copper and gold at a capacity of 50 tonnes per hour, allowing Metso to verify the required equipment for the customer's future needs.

The next pilot with HRC technology will take place in November 2017 in Chile.

Metso is a world-leading industrial company serving the mining, aggregates, recycling, oil, gas, pulp, paper and process industries. We help our customers improve their operational efficiency, reduce risks and increase profitability by using our unique knowledge, experienced people and innovative solutions to build new, sustainable ways of growing together.

Our products range from mining and aggregates processing equipment and systems, to industrial valves and controls. Our customers are supported by a broad scope of services and a global network of over 80 service centers and about 6,000 service professionals. Metso has an uncompromising attitude towards safety.

Metso is listed on the Nasdaq Helsinki in Finland and had sales of about EUR 2.6 billion in 2016. Metso employs over 11,000 people in more than 50 countries. Expect results.

Enquiry Form



More News

Metso Corporation: Managers' transactions - Antti Mäkinen

Metso Corporation: Managers' transactions - Antti Mäkinen

Metso Corporation: Managers' transactions - Antti Mäkinen Metso Corporation, stock exchange release, April 30, 2018 at 9:45 EEST Metso Corporation h...

Read More
Metso's restated financial information for 2017 (IFRS 15 and Flow Control's services business)

Metso's restated financial information for 2017 (IFRS 15 and Flow Control's services business)

Metso's restated financial information for 2017 (IFRS 15 and Flow Control's services business) Metso Corporation, stock exchange release, April 16, 2...

Read More
Shareholders’ Nomination Board’s proposals regarding the composition and remuneration of the Board of Directors of Metso Outotec

Shareholders’ Nomination Board’s proposals regarding the composition and remuneration of the Board of Directors of Metso Outotec

Metso Outotec’s Shareholders’ Nomination Board will propose to the Annual General Meeting, planned to be held on April 23, 2021, that the Board of Dir...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: