ADW15-SP16 Weighing Controller with up to 16 set points

The DIN rail mounted remote relay units offer an increased number of set points over that provided by a standard ADW15 strain gauge indicator/controller. This allows for multi action operations such as batch and recipe control. The software of the ADW15-SP16 gives the user freedom to program the number of set points for their requirements. A single ADW15-SP16 will control up to 16 set points, programmed from its front panel. Set points can be individually set up with In Flight compensation and hysteresis values. Separate 'Output Latch' and 'Output Action' for up to 14 of the16 set points is available, settable from the front panel of the ADW15-SP16. A special mnemonic allows the user to specify the number of set points to be used. A DIN rail mounted power supply unit is required where more than 4 set points are to be used. The units are driven from the ADW-SP16 via an internal, special remote driver board. All relays are pluggable and connections are made via field screw terminals. The operating procedures for these units are to be considered together with the standard ADW15 when preparing the system for operation. LCM Systems can supply this as a calibrated system with any of our range of compatible sensors. Please contact our technical department, to discuss your application.

For more information on ADW15-SP16 Weighing Controller with up to 16 set points talk to LCM Systems Ltd