Stream Liner Joining Tape Kit

Our stream liner joining tape kit is aimed at people who do this for a living. Gordon Low Products works with landscapers and garden designers nationwide, supplying tough, long lasting products with proper technical backup.

The method is straightforward. Scrub the mating surfaces with a scrubber pad, apply QuickPrimePlus primer, lay the tape and roll it firmly. Done properly, you get a permanent watertight seal that will outlast most of the landscaping around it.

QuickSeam FormFlash is 228mm wide, 15.24m long and 1.6mm thick, with uncured EPDM flashing laminated to cured seam tape. It moulds around inside and outside corners, reinforces lap seams, seals pipe penetrations and makes neat, strong repairs.

Joins are where most liner failures start. Our seaming range gives installers everything needed to join panels, fix rills and waterfalls, seal pipe penetrations and make repairs that last. The same simple process is used on large commercial projects, so it is proven well beyond the back garden.

The QuickSeam Universal Pipe Sleeve is moulded EPDM with a 330mm base flange, fitting pipes from 25.4mm to 174.6mm outside diameter. It comes with pre applied QuickSeam tape and a stainless steel hose clamp for a tidy, watertight penetration.

Landscapers and garden designers use our products on everything from high end private gardens to public realm schemes. We help you pick the right grade, size it properly and get it installed without drama.

We supply across the whole of the UK from our base in Wyboston, Bedfordshire. Get in touch on 01480 405 433 for trade pricing and technical support.

For more information on Stream Liner Joining Tape Kit talk to Gordon Low Products Ltd