Liner To Timber Bonding Adhesive

Sourcing liner to timber bonding adhesive should be simple. At Gordon Low Products we keep it that way, supplying builders and developers with quality products, honest advice and fast turnaround.

The method is straightforward. Scrub the mating surfaces with a scrubber pad, apply QuickPrimePlus primer, lay the tape and roll it firmly. Done properly, you get a permanent watertight seal that will outlast most of the landscaping around it.

QuickSeam FormFlash is 228mm wide, 15.24m long and 1.6mm thick, with uncured EPDM flashing laminated to cured seam tape. It moulds around inside and outside corners, reinforces lap seams, seals pipe penetrations and makes neat, strong repairs.

Joins are where most liner failures start. Our seaming range gives installers everything needed to join panels, fix rills and waterfalls, seal pipe penetrations and make repairs that last. The same simple process is used on large commercial projects, so it is proven well beyond the back garden.

The QuickSeam Universal Pipe Sleeve is moulded EPDM with a 330mm base flange, fitting pipes from 25.4mm to 174.6mm outside diameter. It comes with pre applied QuickSeam tape and a stainless steel hose clamp for a tidy, watertight penetration.

Builders and developers use our products to meet water management and planning requirements on site. We supply to programme and give proper technical advice, taking one more job off the site manager's list.

With decades of experience as a family run business and the backing of SealEco since 2022, we have the capacity and know-how to handle projects of any size. Speak to our team on 01480 405 433.

For more information on Liner To Timber Bonding Adhesive talk to Gordon Low Products Ltd