Inside Corner Flashing For EPDM Liners

Sourcing inside corner flashing for EPDM liners should be simple. At Gordon Low Products we keep it that way, supplying contractors with quality products, honest advice and fast turnaround.

The method is straightforward. Scrub the mating surfaces with a scrubber pad, apply QuickPrimePlus primer, lay the tape and roll it firmly. Done properly, you get a permanent watertight seal that will outlast most of the landscaping around it.

Our Pond Liner Joining Kit includes 3 metres of seaming tape, a tin of QuickPrimePlus, chalk, a scrubber pad and a roller. The Repair Kit has a 230mm x 150mm FormFlash patch and QuickPrimePlus. For bonding EPDM to masonry, timber, metal or insulation, Elevate Bonding Adhesive BA-2012 does the job.

Joins are where most liner failures start. Our seaming range gives installers everything needed to join panels, fix rills and waterfalls, seal pipe penetrations and make repairs that last. The same simple process is used on large commercial projects, so it is proven well beyond the back garden.

QuickSeam FormFlash is 228mm wide, 15.24m long and 1.6mm thick, with uncured EPDM flashing laminated to cured seam tape. It moulds around inside and outside corners, reinforces lap seams, seals pipe penetrations and makes neat, strong repairs.

Civil engineering, groundworks and specialist installation contractors buy from us because we supply the right kit to the right spec, on time. That keeps crews moving and projects handed over on schedule.

With decades of experience as a family run business and the backing of SealEco since 2022, we have the capacity and know-how to handle projects of any size. Speak to our team on 01480 405 433.

For more information on Inside Corner Flashing For EPDM Liners talk to Gordon Low Products Ltd