Sign In
The 316 stainless steel range of flow turbines are suitable for almost any clean low to medium viscosity fluid.
Working on the well proven turbine principle, the flow of liquid acts against the angled surfaces of a set of precision
turbine blades causing them to rotate. The movement of the tip of each blade is detected by a sensor located in the
body of the meter. This is then converted in to a pulsed signal, the frequency of which is proportional to the flow rate
through the meter.
A high pressure rating of up to 400 bar and temperature rating of 110°C make this unit perfect for many industries.
Available in 12 sizes from 1 L/min up to 9000 L/min, and with screwed or flanged connections, means there is aunit to meet your requirements. A millivolt sinewave, amplified squarewave or 4-20mA analogue signal is available.
There is also a choice of a head mounted LCD rate / totaliser. Accuracy is ±0.5% of reading and each turbine is supplied with its own calibration certificate.
A full range of electronic data loggers and panel mounted displays are available to accompany these turbines go to the instrumentation section
Flowtechnik RN3/4/7 Turbine Flowmeters
All RN series turbines are CE marked under the Pressure Equipment Directive.c
Maximum pressure and temperature ratings are subject to the fluid specification, please call to confirm before ordering.
B = ANSI 150 -N = ND 16 - I = ANSI 600 - K = ANSI 1500 -C = ANSI 300 - J = ANSI 900
For more information on Gas Flow Meters talk to UK FLOWTECHNIK LIMITED
Enquire Now
List your company on FindTheNeedle.