search

Hydrogen Tube Furnace up to 1600 °C - HTRH-H2

Hydrogen Tube Furnace up to 1600 °C - HTRH-H2

For further information about Hydrogen Tube Furnace up to 1600 °C - HTRH-H2 please contact us.

The Hydrogen tube furnace system is based on the popular HTRH 16/100/600 system. The furnace is designed to meet all required regulations for the safe handling of Hydrogen gas.

In principle, every tube furnace can be modified to safely work with Hydrogen. This system is based on the long established HTRH 16/100/600 tube furnace. The system utilizes a ceramic tube with water-cooled, leak tight flanges at both ends. The tube furnace is able to provide heat treatment up to 1600 °C even in a pure Hydrogen atmosphere. The ceramic tube is automatically flooded with inert gas prior to the introduction of Hydrogen gas for safety. Inert gas is provided by a flooding tank system that is filled with inert gas at high pressure. To purge remaining Oxygen out of the tube prior to heat treatment, the flooding tank is discharged and is then refilled. The gas outlet system is connected to an afterburner for outgoing Hydrogen combustion.

The gas inlet to the afterburner is heated to prevent any condensate formation in the system. The afterburner is driven by compressed air and propane gas. The afterburner will combust Hydrogen and all other gaseous by-products generated during the process.

All gases are controlled by means of a fully automated flow controller. In the event a malfunction is detected, the system is immediately brought to a secure state. All devices are manufactured to adhere to SIL2 standards. A Hydrogen sensor is installed at the top of the furnace, and in the event that a Hydrogen leak is detected, the sensor immediately responds. If a Hydrogen leak is detected, the furnace is flooded with inert gas, and the system is brought to a safe status. Furnace controls are programmed with an intuitive and user-friendly touch panel interface.

All tube furnaces can serve as a base system to be used with Hydrogen; hence, different usable spaces and temperatures are possible. If Hydrogen at more than 1800 °C is required, a cold wall furnace must be selected.

Please contact us for more info about Hydrogen Tube Furnace up to 1600 °C - HTRH-H2.

For more information on  Hydrogen Tube Furnace up to 1600 °C - HTRH-H2  talk to  Carbolite Gero

Enquiry Form



More Products

Laboratory Chamber Furnace - CWF

Laboratory Chamber Furnace - CWF

For further information about Laboratory Chamber Furnace - CWF please contact us.The CWF range of general purpose laboratory chamber furnaces is bench...

Read More
Ashing Furnace AAF - 18 & 32 litres

Ashing Furnace AAF - 18 & 32 litres

For further information about Ashing Furnace AAF - 18 & 32 litres please contact us.The AAF ashing furnace range is designed specifically to provide o...

Read More
Large General Purpose Industrial Oven - LGP

Large General Purpose Industrial Oven - LGP

For further information about Large General Purpose Industrial Oven - LGP please contact us.The LGP large general purpose ovens offer the greatest cho...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: