AC Servo Motors

BSM N-series provides applications with low inertia to attain the highest acceleration capability to allow you to position faster. The BSM N-series is used in the world's fastest machines and demanding applications. The N-Series brushless servo motors provide a very responsive acceleration in a rugged, durable design with high energy Neodymium-Iron-Boron magnetics. This series provides continuous stall torque capability ranging from 0.45 N-m (3.9 Lb-In) to 40 N-m (354 Lb-In). Peak torque capability is nominally 4 times continuous. This series has the lowest inertia to provide the maximum torque per package size. The BSM motor has been time proven over the years. The BSM N-series is used in the world's fastest machines, in industrial motion control applications such as: indexers, form/fill/seal, flying shears, cut-to-length, robotics, insertion, packaging, capping machines, laser trimming, marking/labelling and many other demanding applications. The BSM C-series has as standard, a “higher” inertia compared to other ABB brushless motors – thus providing an excellent match for equipment requiring “higher” inertial matching for the machine. The goal of this series design was to increase torque while reducing package size (comparing to previous ABB series). The result was a torque increase of up to 50% in some models, with a package reduction of up to 50mm (2 inches). The BSM C-series provides continuous stall torques ranging from 1.2 N-m (10 Lb-In) to 30 N-m (265 Lb-In). Peak torques are 3 times continuous. The C-Series provides an economical package best used in applications with higher load inertias. The rotor is a time proven quality design – the reliability has been proven in numerous worldwide applications. The BSM C-series is used in equipment such as: moving webs, machine tool, packaging, factory automation, material handling, printing converting, food packaging, assembly lines, and many other demanding applications. BSM Stainless Steel Motors ABB's totally stainless steel SSBSM series of servo motors are designed for food, liquid, pharmaceutical, washdown, and high hygiene applications. They may be applied in harsh, corrosive environments. These motors are designed to handle IP67 and withstand 1500 psi washdown conditions. These stainless steel servo motors are offered in standard and low inertia designs for best machine inertial matching. Included in this quality design are lazer etched nameplate, FDA shaft seal, environmental protected stator with premium moisture resistant wire, and internal thermal over temperature protection. Baldor?s SSBSM products are designed to be durable.

For more information on AC Servo Motors talk to ABB Motion Limited