PBM-30-2 PROFILE BENDER MANUAL 2 DRIVEN ROLLS ? 1 PHASE OR 3-PHASE

PBM-30-2 PROFILE BENDER MANUAL 2 DRIVEN ROLLS ? 1 PHASE OR 3-PHASE The PBM-30 Profile bender has 30 mm shafts and 2 driven bottom rolls driven either by a 1-Phase or a 3-Phase motor and comes with a standard set of section rolls that are configurable and are suitable for most bending applications of square or angular profiles. If you wish to bend round tubes or pipe, we have tools ready to go off the shelf for all common sizes such as 42.2 mm and 48.3 mm outside diameters along with many other sizes being readily available. If you are wanting to bend custom profiles all we need from you is either a drawing or a piece of the profile and we can quote your custom rolls. The top roll is a bearing roll and is adjusted with a ratchet mechanism and the distance is controlled with a scale on the side of the top roll which can produce accurate bends. The head of the machine flips backward to make larger and longer bending applications easier in the horizontal plane and the roll speed is controlled with a potentiometer. The direction of the rolls is controlled with an easy-to-use foot pedal pendant. One of the most common machines in a manufacturing or fabrication facility is a machine called a Profile Bender. A Profile Bender does exactly what it says, it bends profiles. This type of machine also has many other names that descend directly from the overall versatility of this type of machine. Some common other names include Roll Bender, Profile Roller, Angle Roller, Section Roll, Ring Roller, Ring Bender, Ring Roll Bender, Section Bending Machines, Section Bender.

For more information on PBM-30-2 PROFILE BENDER MANUAL 2 DRIVEN ROLLS ? 1 PHASE OR 3-PHASE talk to WorkshopPress.co.uk