Electronic Ballasts

Why use electronic power supplies ? Advantages for the user: Stepless adjustability of lamp power and through its optimal adaptation to the curing process e.g. at variable machine speeds. Results are lower heat load of the irradiated object and the surrounding machines as well as energy saving. Possibility of “balancing out” lamp ageing. The requested and adjusted lamp power is consistently controlled and therefore independent of mains voltage variations or other influences. Advantages for the machine producer (OEM): ONE power supply for many different lamps and lamp powers: For lamp power from 1000 to 20,000 watt there are only five different EPS-types, which are necessary. Without changing the power supply, different lamps in the respective power range can be problem-free connected to EPS, merely the minimum and maximum values of the lamp and the respective EPS limits are set. EPS are in very many cases smaller and lighter than conventional power supplies. There is less time for installation and wiring. Optimal for export, since it can be used worldwide on 380 to 505 V at 50 and 60Hz. without changing the power supply. Possibilities of installing the power supply directly into the machine, so that the switch cabinet becomes unnecessary or it becomes clearly smaller. Constant load of the 3 phases. No additional ignition unit and no reactive current compensation are necessary. Distance between power supply and lamp up to 15 m.

For more information on Electronic Ballasts talk to uv-technik international Ltd