Add My Company
Sign In
Kikusui PBZ20-20A DC Power Supplies +/- 0 -20V +/- 0-20A
The Kikusui PBZ 20-20A (+/-0 to 20V +/-0 to 20A (6x pk)) is a bipolar high speed DC regulated power source that can continuously change both + and – polarities passing through 0 without changing the output terminal. By adopting a "Switching + Linear" system, the PBZ now incorporates both drastic weight reduction as well as high speed and low noise operation. Since operation covers 4 quadrants, power can be both supplied (source) and absorbed (sink). The PBZ can also drive inductive or capacitive loads. The PBZ is also equipped with a signal generator function which enables waveform and sequence creation. The PBZ is also capable of synchronised operation which is required for voltage variation tests. Multiple PLZ units can be combined for large current applications through master-slave parallel operation. Peak current output 6 times the rating (PBZ20-20A) The PBZ20-20A is capable of generating a short-term peak current up to 6 times the rating when current response is set to 1ms in CV mode. Other response settings will activate the current limit and allow the operator to safely use the device without 6x peak current output. When current response is set to 1ms, the PBZ20-20A automatically decreases response speed and allows for peak current ouput while the current limit is deactivated. This means that the current function will be active at all times when short-term peak current is not output and will have no effect on current response in CC mode. Short-term peak current output is available in both bipolar and unipolar mode.
The Kikusui PBZ 20-20A (+/-0 to 20V +/-0 to 20A (6x pk)) is a bipolar high speed DC regulated power source that can continuously change both + and – polarities passing through 0 without changing the output terminal. By adopting a "Switching + Linear" system, the PBZ now incorporates both drastic weight reduction as well as high speed and low noise operation. Since operation covers 4 quadrants, power can be both supplied (source) and absorbed (sink). The PBZ can also drive inductive or capacitive loads. The PBZ is also equipped with a signal generator function which enables waveform and sequence creation. The PBZ is also capable of synchronised operation which is required for voltage variation tests. Multiple PLZ units can be combined for large current applications through master-slave parallel operation. Peak current output 6 times the rating (PBZ20-20A) The PBZ20-20A is capable of generating a short-term peak current up to 6 times the rating when current response is set to 1ms in CV mode. Other response settings will activate the current limit and allow the operator to safely use the device without 6x peak current output. When current response is set to 1ms, the PBZ20-20A automatically decreases response speed and allows for peak current ouput while the current limit is deactivated. This means that the current function will be active at all times when short-term peak current is not output and will have no effect on current response in CC mode. Short-term peak current output is available in both bipolar and unipolar mode.
For more information on Kikusui PBZ20-20A DC Power Supplies +/- 0 -20V +/- 0-20A talk to Telonic Instruments Ltd
Enquire Now
More products
List your company on FindTheNeedle.