DJI Matrice 600 Pro UAV

The Matrice 600 Pro (M600 Pro) inherits everything from the M600 with improved flight performance and better loading capacity..Pre-installed arms and antennas reduce time required for setup, and the systems modular design makes it easy to mount additional modules. The airframe is equipped with the latest DJI technologies, including the A3 Pro flight controller, Lightbridge 2 HD transmission system, Intelligent Batteries and Battery Management system. All Zenmuse cameras and gimbals are natively compatible and full integration with third party software and hardware make the M600 Pro ideal for professional aerial photography and industrial applications. A3 Pro Flight Controller The A3 Pro Flight Controller has triple modular redundancy and diagnostic algorithms that compare sensor data from three sets of GNSS units, with additional analytical redundancies for a total of six. A new dampening system for the A3s modules enable precise control of multi-rotor aircraft, providing accurate data for stable flight performance. Self-adaptive systems will automatically adjust flight parameters based on different payloads. Compatibility with D-RTK GNSS means that the A3 Pro can withstand magnetic interference, providing centimetre level accuracy, suitable for various industrial applications. Complete Integration. Ultra Convenient The M600 Pro is simple and easy to set up, ready to fly in a matter of minutes. Its airframe has been optimised for easier transportation with a quick-release landing gear design and folding frame arms. Under the new upper cover, the positions of GNSS modules and sensors have been revamped and a new dampening system for the IMU units increases reliability during flight. The M600 Pro also comes with a durable, customisable case that absorbs impact from shakes or falls, providing all-round protection when carried or transported. Charge Six Batteries Simultaneously The M600 Pro charger has six charging hubs, enabling it to charge six Intelligent Batteries simultaneously. All six batteries can be fully charged in a short amount of time*, for quick and efficient preparation. * 92 minutes for TB47S and 110 minutes for TB48S. Aerial Imaging Solution Dust proof propulsion systems simplify maintenance and active cooling motors ensure that operation is reliable for extended periods of time. The M600 Pro is natively compatible with current Zenmuse cameras and gimbals. With a maximum payload of 6kg, it effortlessly supports the Ronin-MX gimbal, DJI Focus and a range of cameras from Micro Four Thirds systems to the RED EPIC. Extended Flight Time and Transmission Range The M600 Pro has an extended flight time and a 5km long-range transmission. A comprehensive battery management system means that if any of its six Intelligent Batteries are turned on or off, the rest will follow suit. The battery management system monitors every battery during flight, ensuring safe landing in the event of single battery failure. Compared to traditional non-intelligent batteries, the M600 Pros battery management system simplifies maintenance while enhancing security. To legally fly a small unmanned aerial system in the UK the Operator is legally required to hold a Permission for Commercial Operations (PfCO) from the UK Civil Aviation Authority (CAA). Before a PfCO is issued the Operator must write and have approved an Operations Manual. Also any pilots who are to fly for that Operator must hold a CAA approved NQE issued qualification demonstrating their operating competence and flying capability. Camera NOT included.The Matrice 600 Pro (M600 Pro) inherits everything from the M600 with improved flight performance and better loading capacity. Pre-installed arms and antennas reduce time required for setup, and the system's modular design makes it easy to mount additional modules.

For more information on DJI Matrice 600 Pro UAV talk to Sunbelt Rentals Survey