60 x 6 mm IBC Adaptor Tee piece with Valve to 25 mm Hose Tails

60 x 6 mm IBC Adaptor Tee piece with Valve to 25 mm Hose Tails

60 x 6 mm IBC Adaptor Tee piece with with valve 25 mm Hose Tails Can be used in conjunction with our connection kits this fitting fits onto a standard 60 mm x 6 mm coarse IBC thread and gives you a tee piece with a valve where you can fit 25 mm hose either side. The fittings' orientation can be adapted to point the hose tails in different directions if required. The tee piece can be unscrewed. PTFE supplied to seal all the joints. The fittings are all 1 inch BSP connections made from food grade polypropylene. The 60 mm Adaptor takes the outlet to a 1 inch BSP male thread where the 1 inch BSP female tee piece screws onto. On one end you have a 1 inch BSP plastic ball valve. The two hose tails screw in either end to give you a 25 mm hose tails so you can push on a jubilee clip a 1 inch hose. When linking quite a few IBCs together it is best to have this set up on the very end tank. You can then open all fo the IBC valves open and use the ball valve to control the 2000, 3000, 4000 or however many litres of water depending on how many tanks you have linked together.

For more information on 60 x 6 mm IBC Adaptor Tee piece with Valve to 25 mm Hose Tails talk to Smiths Of The Forest Of Dean Ltd