search

EPDM THRU WALL OUTLET 100MM

EPDM THRU WALL OUTLET 100MM

Product Code: 697

The EPDM through wall outlet ensures complete waterproofing around and into the drain pipe, eliminating the risk of leaks. Suitable for EPDM and liquid flat roofing systems. Aperture of 100 x 100mm, angled shank measures 425mm. UV and chemical salt resistant.

EPDM Through Wall/Paraphet Outlet Flexible, high quality roof outlets for corners and junctions between the roof and the parapet wall. These EPDM outlets can be mechanically fixed and waterproofed over, or they can be bonded to a liquid membrane using the sandwich technique They are designed to be bonded to EPDM and bituminous membranes. They can be bonded in a sandwich type of installation so the flap is secured between two layers of liquid waterproofing to ensure a good bond. Although the flap or flange is not perforated, the membrane (or adhesive) will still grip onto the material to ensure a good bond. The EPDM will tolerate a temperature of 120°C. Alternatively they can be mechanically fixed or bonded using adhesive. The exact method of fixing will depend on the waterproofing system being used. They ensure that the area is completely waterproofed around and into the drain pipe, so that there is no risk of water creeping behind the drainage hole and causing a leak. The actual hole is square at 100 x 100mm wide. The pipe or shank is slightly angled to encourage the flow of water away from the mouth and down the pipe. The shank is 425mm long, so it can cross through 40cm of wall before having to be connected up. Being made form EPDM the connector is extremely tough, fully flexible and resistant to UV deterioration and chemical salts. They can be fitted to vertical downpipes at the edge of the retaining wall, or on a horizontal plane through the upstand or wall to then connect to the external downpipe. A is the height of the outlet drainage hole (100mm) L is the length of the shank or outlet pipe (100mm) F1 is the width of the border flap or flange around the underside of the outlet hole (425mm) F2 is the height of the border flap or flange to the left and right, and above the outlet hole (150mm) F3 is the width of the flange (160mm) Product code: ECO1

For more information on  EPDM THRU WALL OUTLET 100MM  talk to  Permaroof UK Limited

Enquiry Form



More Products

UNIVERSAL LEAF GUARD

UNIVERSAL LEAF GUARD

Universal Leaf Guard Designed to stop any object that may block the efficient draining of rain water. To guarantee the rain water is drained efficien...

Read More
PRO GUN STANDARD

PRO GUN STANDARD

PRO GUN STANDARD (NO-EXTENSION) HIGH QUALITY SPRAY GUN TO WORK WITH THE CANISTER KIT COMES WITH A LIFETIME GUARANTEE Product code: GRBFSTG...

Read More
Tilcor touch up kit -Charcoal

Tilcor touch up kit -Charcoal

Tilcor touch up kit for covering nail head and other fixings after application

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: