Responsive Wireless I/O from Omniflex

Radio networks traditionally follow the Master and Slave methodology for data acquisition. Teleterm overcomes this by using Peer to Peer technology along with other features. Radio networks traditionally follow the Master (main station node) and Slave (out station node) methodology for data acquisition. A single master polls for data from one or more slaves, depending on the network size. Polling is inefficient and if the master fails, the network fails. Omniflex Teleterm M3 Series implements Responsive Wireless with the following advantages: All Out Stations report automatically when they need to. i.e. Change of State or Set Limits reached Faster more efficient reporting and better Control Reduced Radio Noise Fail Over Options for redundancy Bi Directional Signals Repeating capability for longer range Teleterm M3 Series uses licence-free radio bands and is suitable for up to 15 km range. Connect directly to Scada or DCS via Ethernet. The system is ideal for short hop radio links such as: Reservoir Monitoring Tank Gauge Monitoring Remote Pump Control Dam Levels Plant Utilities Reporting (Water, Air, Gas, Steam, Electricity) Plant Condition Monitoring Maximum I/O Flexibility – Mixed Inputs and Output Signals Each Wireless Node allows any mix of 12 Configurable I/O Digital Input Digital Output Analogue Input Analogue Output Programmable in IEC61131 5 Languages Each Node can be programmed as a PLC or just used as a Data Acquisition node. Benefits Low Cost Implementation and cable saving No Master Station required so no polling each outstation Peer to Peer Communication simplifies point to point plant communications Change of state(digital) trigger or cyclic(analogue) for communications The network traffic is kept low so that only important data is transmitted. These benefits make it ideally suited for data acquisition. Solve all your Data Acquisition needs today!

For more information on Responsive Wireless I/O from Omniflex talk to Omniflex UK Limited