Stopends - Niagara For The Construction Industry

110mm Niagara Ogee A traditional ogee style profile. To be used in conjunction with: 68mm Round, 65mm Square or 80mm Round External Stop Ends effectively cap off the guttering at the end of the run. The stop end is held to the gutter by two moulded clips, which force the gutter down and compresses the seal at the bottom of the fitting, thus providing a watertight seal. Stop Ends should be supported by a fascia bracket within 150mm of the fitting to prevent the end of the gutter run from collecting water and sagging. Internal Stop Ends are clipped into a fitting such an angle or running outlet to effectively cap off the guttering at that fitting. The stop end clips down and compresses the seal at the bottom of the angle or outlet, thus providing a watertight seal. Fittings with internal stop ends inserted should be supported by fixing to the fascia board to prevent the guttering from collecting water at that point and sagging. As the Niagara Ogee gutter is not a symmetrical system, these must be ordered as either Left Hand or Right Hand More Details

For more information on Stopends - Niagara For The Construction Industry talk to Meridian Building Plastics