Bends For The Construction Industry

135 degree bends are used to change the direction of a PVC soil pipe. It is also sometimes referred to as a 45 degree bend. This fitting can be used in either a horizontal or vertical plane, and two bends together are sometimes used as a pair to create an offset within a pipe run. 92.5 degree bends are used to change the direction of a PVC soil pipe. Most commonly used in a horizontal plane, the 92.5 angle gives a slight fall which creates a self-cleansing flow within the soil pipe. Access bends are used to change the direction of a PVC soil pipe whilst allowing access into the pipe from both directions for inspection and cleaning. Most commonly used in a horizontal plane, the 92.5 degree angle gives a slight fall which creates a self-cleansing flow within the soil pipe. To use the access point, simply remove the access cap by unscrewing it from the threaded projection on the bend. This will release any blockage so it is always advisable to stand aside at this point! This type of bend has a ring seal push fit socket on one end and a plain spigot end at the other. The spigot end is the same size as 110mm pipe so it can be connected into the socketed end of another fitting or pipe as required. Our 110mm Ring Seal Soil System provides an efficient means of waste water drainage and foul discharge from appliances. Manufactured in PVC-U with push-fit joints through an innovatively designed seal and snap cap system. ●  Provides an efficient means of waste water drainage and foul discharge from appliances. ●  Manufactured in PVC-U to give a strong and durable product, lightweight and easy to work with and suitable for high temperature waste discharge. ●  Fittings have an aesthetic modern look, are compact in size yet remain within the British Standard specification. ●  Push-Fit joint through an innovatively designed seal and snap cap system. ●  Comprehensive range of fittings to suit most installations and which integrate with all Our Above and Below Ground Drainage Systems.

For more information on Bends For The Construction Industry talk to Meridian Building Plastics