Mezzanine Goods Lift Monks Cross

Mezzanine Goods Lift Monks Cross York 400kg 90° loading single mast hydraulic Mezzanine Goods Lift installed Monks Cross York with a finished floor level 3390mm and platform size 1100mm x 1100mm fitted with 1100mm high infilled panels on the non-loading sides and single opening interlocked gate finished in Red RAL 3020 A self-supporting lift structure manufactured from 100mm x 100mm box section steel with clad infilled panels Grey RAL 7024. Goods lift fitted with 2000mm high single loading door cladded with Perspex viewing panel at each level and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level structure is 2200mm. At the lower level a fixed ramp 1250mm long x 1180mm wide will be provided to assist loading on to the 90mm deep platform finished Red RAL 3020. To prevent damage from pallet trucks and fork lift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 2.2Kw control voltage 24 volt IP55. General Specification • Emergency lowering system when power is cut off • Pre wired control box included magnetic starter and overload fuse • Upper level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks • Control points are fitted to both ground and upper floor levels • The hydraulic power pack and electrical system housed separately at ground level • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor Installation; Stoneacre Motor Group, Jockey Lane, Monks Cross, York, North Yorkshire YO32 9GY Warehouses often require flexible and cost-effective solutions to move goods and materials from ground floors to raised storage platforms and mezzanine floors. The range of mezzanine goods lifts from Manual Handling Solutions provides the ideal solution to your vertical movement needs. Widely used in distribution facilities, warehouses, car dealerships, retail storage areas and many other environments, mezzanine lifts facilitate the increased use of vertical space in storage areas and make it easy to safely and quickly transfer goods from first floor level to a raised floor or multi floor landings. Goods lifts can also be installed along the edge of the raised floor or in a specially cut aperture within in the mezzanine. Our mezzanine goods lifts range of hydraulic goods lifts are ideal for supermarkets, warehouses, factories, restaurants, pubs, museums, theatres, hotels, retail in basement or light-well locations. Mezzanine Goods Lifts covering Clifton, Acomb, Heworth, Rawcliffe, Murton, Heslington, Fulford, Middlethorpe. For a quotation please contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/ http://goods-lifts.com http://www.goodslift.co.uk/ #goodslifts #goodslift #mezzaninegoodslifts #mezzaninefloors #manualhandlingsolutions #mezzanines #selfstorage

For more information on Mezzanine Goods Lift Monks Cross talk to Manual Handling Solutions, Goods Lifts