search

Goods Lift Lincoln ex Elephante Goods Lift Project

Goods Lift Lincoln ex Elephante Goods Lift Project

Product Code: Elephante Goods Lifts

This project was undertaken due to Elephante Goods Lifts going into administration; all projects welcome

Custom designed hydraulic 3 stop Goods Lift 1500kg twin mast installed Lincoln with a clear platform size 2600mm x 1500mm, finished floor level at 6000mm. Platform fitted with 3 x 1100mm high infilled panels on the non-loading sides in Red RAL 3020 to protect goods during the lifting process. Goods lift supplied with safety shoot bolts a loading ramp size H120mm x W2860mm x L1250mm at lower level and “Press to Go” one touch controls with emergency stop at each level.

Goods Lift self-supporting lift structure is manufactured from 120mm box section steel with clad infilled panels RAL 7024. Goods lift manufactured with 2000mm high double loading gates with perspex viewing panels at each level and these are fitted with magnetic interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level guarding is 2200mm

General Specification • Emergency lowering system when power is cut off • Pre wired control box included magnetic starter and overload fuse • Upper level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks • Control points are fitted to both ground and upper floor levels • The hydraulic power pack and electrical system housed separately at ground level • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor • Lifting speed 0.14 m/s

Manual Handling Solutions – Goods Lifts have a wealth of experience in the design, manufacturing process and installing cost effective mezzanine goods lifts in commercial, residential and industrial buildings properties throughout Lincolnshire and the UK. We can design, manufacture and install a bespoke goods lift that accommodates almost any space and specifications. Our goods lifts range of hydraulic goods lifts are ideal for warehouse, factories, supermarkets, retail stores and more.

Goods Lifts Lincolnshire covering Lincoln, Boston, Grantham, Horncastle, Sleaford, Bourne, Skegness, Elephante Goods Lifts

For a quotation please contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/

Enquiry Form



More Products

Handloaded Goods Lift

Handloaded Goods Lift

Customised 250kg Handloaded mezzanine goods lift enclosed in a self-supporting mesh shaft. The platform will be 800mm x 1000mm and guarded 200mm high ...

Read More
Goods Lift Cleckheaton

Goods Lift Cleckheaton

Goods Lift Cleckheaton 500kg through car opposed mast hydraulic Goods Lift installed Rawfolds, Cleckheaton, West Yorkshire with a finished floor level...

Read More
SC-500-D-E Battery Electric Scissor Tables

SC-500-D-E Battery Electric Scissor Tables

SC-500-D-E Heavy Duty Premium Double Electric Mobile Scissor Table 500kg capacity Platform Size 840mm x 1350mm, Raised Height 1900mm Closed Height 49...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: