search

Cellar Lift, Cellar Lifts, Pubs, Clubs, Hotels, Restaurants

Cellar Lift, Cellar Lifts, Pubs, Clubs, Hotels, Restaurants

Cellar Lift 275kg Vertical Chain Drive

Cellar Lift with a raised height 3050mm, A fixed 3mm platform plate will be supplied, the size to be 830mm x 765mm. The fixing support plate will allow for adjustment of 37mm up or down to allow for a fluctuation in the finished floor height. Platform to be fitted with Roller Conveyor supplied and fitted by client height being 85mm.Roller conveyor to extend 20mm above the mast to allow for products to pass over the mast onto an adjoining conveyor.

A 20 amp, 240 volt, single-phase supply is required terminated in a double pole switch at the lower level. Control is via a hold to run handle close to this supply point.

For installation by a third party (in South Africa) chain driven lift.

Motor spec Power Pack with anti-condensation heater •2.2 Kw, 1 Phase, 4 Pole, IP65 & Anti Condensation Heater Manifold with Check, Relief (80-250 Bar) & 1/4" BSP •Auxillary Pressure Port •Gear Pump to Deliver 8.7 L/min @ 120 Bar Max Pressure •15 Litre Steel Vertical Tank with Filler Cap & Drain Port •Single Station Cetop 3 with Dual Solenoid Valve (P to T, AB •Blocked in Centre Position) with 12v DC Coils & Connectors •3/8" BSP A & B Ports

Spare Parts •Power Pack, Part Number 551-000007 •Valve block, which even if the power pack did burn out could be re-used, but if they wanted to stock a new one, Part Number R62 •Hydraulic Drive Motor, Part Number R72 •Simplex Chain, Part Number SCL14 •Chain Connector Links, Part Number SCL15 •Heavy Duty Attachment links (chain to carriage), Part Number CLB

Manual Handling Solutions (MHS.COM Ltd) offer bespoke custom design Goods Lifts, Mezzanine Floor Lifts, Mezzanine Goods Lifts, Material Lifts, Pallet Lifts to suit a wide range of different applications. All our goods lifts have a range of options and are built to suit individual customer requirements.

Full details from Manual Handling Solutions (MHS.COM Ltd) 58, Paige Close Watlington, King's Lynn, Norfolk PE33 0TQ UK Tel 01553 811977 sales@manualhandlingsolutions.co.uk www.manualhandlingsolutions.co.uk

Enquiry Form



More Products

Mezz Goods Lift

Mezz Goods Lift

Goods Lift, with maximum working load 250kg, fully enclosed in a self-supporting mesh shaft. The platform will be 1000mm x 700mm and guarded two sides...

Read More
Goods Lifts Leominster

Goods Lifts Leominster

Goods Lifts Leominster Herefordshire 2 x bespoke 2 stop 500kg hydraulic Goods only Lifts with opposed mast installed Leominster Herefordshire for Shir...

Read More
Goods Lift South London

Goods Lift South London

Goods Lift South London Compact 500kg medium duty 2 stop single mast hydraulic Goods only Lift installed College Fields Business Centre, Prince George...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: