search

Bespoke Goods Lift Devon

Bespoke Goods Lift Devon

Product Code: Bespoke Goods Lift Devon

Bespoke Goods Lift installed in Devon Bespoke Goods Lift, with maximum working load 250kg, 3150mm Floor to Floor Height enclosed in a self- supporting mesh shaft. The platform will be 1300mm x 1100mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed. At the lower level a 500mm long fixed ramp will be provided to assist loading on to the 50mm deep platform. (No Ramp Required) A 20 amp, 240 volt, single-phase supply is required terminated in a double pole switch at the lower level. Control is via a hold to run, push button control station adjacent to the gates at both levels. Goods Lift concealed behind partitioning doors (By others) Documentation CE Mark and Declaration of Conformity, Operation and Maintenance Manual issued on completion. LOLER Report of Thorough Examination and Test issued on commission. Training Operator training carried out on completion. The 12 months Statutory Inspections and maintenance ensures continued safe and reliable use of the equipment and full compliance with current legislation. In brief it comprises an annual service with thorough examination and test, a six-month inspection and test and all labour or callout charges. Installation – Devon.

For a quotation please contact; Manual Handling Solutions 58, Paige Close Watlington, King's Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://goodslift.website

Enquiry Form



More Products

Mezzlift - Goods Lift Waist Height Suffolk - www.mezzlift.net

Mezzlift - Goods Lift Waist Height Suffolk - www.mezzlift.net

Small Hand-Loaded Waist Height Mezz Lift Platform size 1000mm x 800mm, the platform will finish 800mm higher than finished floor level at both landing...

Read More
SC-300-D-E Scissor Tables

SC-300-D-E Scissor Tables

SC-300-D-E Mobile Double Electric Scissor Tables 300kg capacity with a platform size 590mm x 840mm, raised height 1350mm closed height 295mm optional ...

Read More
4 Stop External Hot Dipped Galvanised Goods Lift

4 Stop External Hot Dipped Galvanised Goods Lift

4 Stop External Hot Dipped Galvanised Goods Lift with Man on Board controls for 1 trained operator and goods only. 1000kg Goods lift with a clear work...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: