search

4 Stop External Hot Dipped Galvanised Goods Lift

4 Stop External Hot Dipped Galvanised Goods Lift

Product Code: 4 Stop External Hot Dipped Galvanised Goods Lift

4 Stop External Hot Dipped Galvanised Goods Lift with Man on Board controls for 1 trained operator and goods only. 1000kg Goods lift with a clear working platform size 1500mm x 2500mm. Goods Lift is situated in a 150mm pit (by other) with a travel height 8500mm over 4 stops. Platform material anti-skid checker plate, Operation Electro-hydraulic, Electrics 3 phase, 415v, 3.0Kw. The Goods Lift is fitted with “Press to go’ Push Button Controls at all landing levels, additional Man-On-Board Controls positioned on the lift platform consisting of “up” and “down” buttons, emergency lowering, emergency stop, intercom and telephone, return to floor button and auxiliary battery back-up system (in case of power failure), positioning control sensors on the platform, platform balustrades on the long sides. Load cells chains tension control: EC type approved certificate issued by a primary Notified Body IMQ. Lift is also fitted with shot bolts that are positioned under the platform these engage into the main ring beam of the support structure at each floor level making it safe for personnel to walk / operate on. A fully supporting, hot dipped galvanised lift structure, manufactured from box section steel with 25mm² galvanised mesh infill panels and 4 loading gates, ground level, level 1 gate, level 2 gate and level 3 gate. The gates are fitted with heavy duty gate locks, interfaced lock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if a loading gate on any level is not fully closed. Lower Twin opening gates 2100mm High. Upper level to finish 1500mm above finished floor level with twin opening gates. To bridge the lift to the existing structure approx. 1500mm supply support framework galvanised infill with checker plate and hand rails. Motor and control Cabinet to house the control panel and motor in a watertight cabinet approx. size 2000mm x 700mm x 800mm.

For a quotation please contact; Manual Handling Solutions 58, Paige Close, Watlington, King's Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://goodslift.website/ http://goodslift.website/galvanised-goods-lift-birkenshaw-bradford-west-yorkshire/

Enquiry Form



More Products

Goods Lift Basement

Goods Lift Basement

Basement Goods Lift installed Kimmeridge Wareham Dorset. Goods only lift with 1000kg capacity with a clear working platform size 860mm x 1927mm. Lift ...

Read More
Mezz Lift - Goods Lift Milton Keynes Buckinghamshire

Mezz Lift - Goods Lift Milton Keynes Buckinghamshire

Goods Lift for Charles Tyrwhitt with SWL 250kg Goods Lift, with maximum working load 250kg which is to be fixed back to the existing side wall, guard...

Read More
Goods Lift Portsmouth Hampshire

Goods Lift Portsmouth Hampshire

MezzLift Goods Lift, with maximum working load 200kg, fully enclosed in a self- supporting mesh shaft. The platform will be 900mm x 1550mm to suit a s...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: