search

Mezzanine Goods Lifts Melbourn

Mezzanine Goods Lifts Melbourn
05/03/2021

Mezzanine Goods Lifts Melbourn Bespoke 2 stop single column 400kg hydraulic Mezzanine Floor Goods Lift installed Saxon Way, Melbourn, Royston SG8 6DN with a finished floor level 3039mm and platform size 1430mm x 1550mm. Platform fitted 2 sides with 1100mm high infilled panels on the non-loading sides and 1100mm high single opening interlocked gates on the loading sides finished in Red RAL 3020.

The goods lift is self-supporting structure manufactured from 120mm x 120mm box section with clad infilled panels Grey RAL 7024. At the bottom level goods lifts is fitted with a 2000mm high single loading gate cladded with Perspex viewing panel, at the upper level due to installation constraints we fitted a 1500mm high enclosure with single gate. Each level fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper-level structure is 1500mm.

Due to layout / configuration of the factory a bespoke fold up ramp was designed for the lift.

To prevent damage from pallet trucks and forklift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 2.2Kw control voltage 24V IP55.

General Specification • Emergency lowering system when power is cut off. • Prewired control box included magnetic starter and overload fuse. • Upper-level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks. • Control points are fitted to both ground and upper floor levels. • The hydraulic power pack and electrical system housed separately at ground level. • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor.

Installation; Saxon Way, Melbourn, Cambridge SG8 6DN

For a quotation please contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/ http://goods-lifts.com http://www.goodslift.co.uk/

Enquiry Form



More News

Goods Lift Bedfordshire

Goods Lift Bedfordshire

Goods Lift Bedfordshire 1000kg with an internal platform size 2000mm width x 1100mm depth x 2000mm high. Floor to floor travel being 3150mm recessed w...

Read More
Goods Lift Greenford London

Goods Lift Greenford London

Goods Lift Greenford London, Goods Lift, with maximum working load 500kg, enclosed in a self-supporting mesh shaft. Platform size 1300mm x 1300mm and ...

Read More
Goods Lift Scotland

Goods Lift Scotland

Goods Lift Scotland Glasgow, with maximum working load 250kg, enclosed in a self-supporting mesh shaft. Lift height 3590mm, platform size 1300mm x 110...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: