search

Mezz Goods Lift Cullompton

Mezz Goods Lift Cullompton
09/11/2021

Mezz Goods Lift Cullompton 1500kg 3 stop single mast hydraulic Mezz Goods Lift installed Kingsmill Industrial Estate, Saunders Way, Cullompton, Devon EX15 1BS with a finished floor level 11574mm and platform size 1535mm x 1360mm. Platform fitted 2 sides with 1100mm high infilled panels on the non-loading sides and 1100mm high twin opening interlocked gates on loading side finished in Red RAL 3020. Goods lift supplied with loading ramp H120mm x W1555mm x L1250mm. Due to the nature of the business the lift was fitted with a roof to prevent egress of dust.

Goods Lift is a self-supporting lift structure manufactured from 150mm x 150mm box section steel with clad infilled panels Grey RAL 7024 fitted with 2000mm high twin loading doors cladded with Perspex viewing panel at all entrances and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper-level structure is 2300mm.

Goods Lift fitted with safety shoot bolts which allow for the operator to enter onto the lift platform safely while the lift is docked at the upper levels, the shoot bolts also eliminate any deflection in the platform during loading and unloading. “Press to Go” one touch controls with emergency stop at all entrances and levels fitted as standard.

To prevent damage from pallet trucks and forklift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 5.5Kw control voltage 24-volt IP55.

General Specification • Emergency lowering system when power is cut off. • Prewired control box included magnetic starter and overload fuse. • Upper-level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks. • Control points are fitted to both ground and upper floor levels. • The hydraulic power pack and electrical system housed separately at ground level. • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor. • All of our mezzanine lifts are CE plated and built-in compliance with the Machinery Directive 2006/42/EC

Installation; ABN, Kingsmill Industrial Estate, Saunders Way, Cullompton, Devon EX15 1BS

For a quotation contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/ http://goods-lifts.com http://www.goodslift.co.uk/

mezzlift #mezzlifts #goodslifts #goodslift #mezzaninegoodslifts #mezzaninefloors #manualhandlingsolutions #mezzanines #selfstorage

Enquiry Form



More News

Mezzanine Goods Lift Castleford

Mezzanine Goods Lift Castleford

Mezzanine Goods Lift Castleford 1000kg hydraulic Mezzanine Goods Lift 4 stop double column installed California Drive, Castleford West Yorkshire WF10 ...

Read More
BayLift London Stansted Airport

BayLift London Stansted Airport

BayLift London Stansted Airport; Bay-Lift, with maximum working load 500kg, Floor to Floor 1520mm, enclosed in a self-supporting mesh shaft. The platf...

Read More
Goods Lift Northamptonshire

Goods Lift Northamptonshire

Goods Lift heavy duty Northamptonshire 1000kg same face entry with a FFL 4057mm enclosed in a self-supporting fully clad panel shaft RAL 7034. Platfor...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: