search

Heavy Duty Mezzanine Goods Lift

Heavy Duty Mezzanine Goods Lift
30/05/2016

Heavy Duty Mezzanine Goods Lift 1000kg installed Caterpillar Marine Power UK Ltd Dorset. Goods Lift with a clear working platform size1500mm x 1500mm having a travel of 4420mm. Lift is surface mount and supplied with a run on checker plated ramp. Controls are Low voltage ‘press to go’ push buttons fitted with key lock and emergency stop at each level, power supply 3 phase, 415v, 50Hz, 3Kw. The lift incorporates shoot bolts these are positioned underneath the lift platform and engage into the main ring beam of the support structure when the lift docks at the upper level allowing personnel to walk on the platform safely. Goods Lift finished in Light Grey (RAL 9006) Dark Grey (RAL 7016) support structure Black. Travel speed 6.0 cm/sec. Goods Lift supplied with a fully self-supporting, lift structure manufactured from 100mm box section steel with 50mm² galvanised mesh infill sides and 2 loading gates, ground, and level 1. These gates are fitted with a heavy duty interfaced lock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if a loading gate on any level is not fully closed. Upper level guarding finished at 1500mm option for higher 2200mm.

Installed – Cobham Road, Wimborne, Dorset

For a quotation please contact; Manual Handling Solutions 58, Paige Close, Watlington, King's Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://goodslift.website/ http://goodslift.website/goods-lift-wimborne-dorset/

Enquiry Form



More News

Mezzanine Goods Lifts Loughborough

Mezzanine Goods Lifts Loughborough

Mezzanine Goods Lifts Loughborough, bespoke twin mast 4 stop through car Goods Lift 500kg installed Shepshed Loughborough with a clear platform size 2...

Read More
External Goods Lifts Galvanised

External Goods Lifts Galvanised

External Goods Lifts Galvanised External galvanised pit installed 3 stop goods lift 1000kg with finished floor levels 3900mm and 6350mm with a platfor...

Read More
Goods Lift Gateshead Tyne and Wear

Goods Lift Gateshead Tyne and Wear

Goods Lift – MezzLift 1000kg, with maximum working load 1000kg, enclosed in a self-supporting mesh shaft. The platform will be 1500mm x 1500mm and gua...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: