search

Goods Lift York

Goods Lift York
09/07/2019

Custom design twin mast 2 stop through car Goods Lift 1000kg installed York with a clear platform size 2500mm x 1500mm, finished floor level 3000mm. The platform is fitted with 2 x 1100mm high infilled panels on the non-loading sides and twin infilled opening interlocked gates on loading sides painted Red RAL 3020. Goods lift supplied with safety shoot bolts, 120mm x 2580mm x 1250mm loading ramp at lower level and “Press to Go” one touch controls with emergency stop at both levels.

The self-supporting lift structure is manufactured from 120mm box section steel with clad infilled panels RAL 7016. Goods lift manufactured with 2000mm high twin loading gates clad and perspex viewing panels at each level and these are fitted with magnetic interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level guarding is 2200mm

General Specification • Emergency lowering system when power is cut off • Pre wired control box included magnetic starter and overload fuse • Upper level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks • Control points are fitted to both ground and upper floor levels • The hydraulic power pack and electrical system housed separately at ground level • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor • Lifting speed 0.14 m/s

Manual Handling Solutions – Goods Lifts have a wealth of experience in the design, manufacturing process and installing cost effective goods lifts in commercial, residential and industrial buildings properties throughout York and the UK. We can design, manufacture and install a bespoke goods lift that accommodates almost any space and specifications. Our goods lifts range of mezzanine floor goods lifts are ideal for warehouse, factories, supermarkets, retail stores and more.

For a quotation please contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/

For more information on  Goods Lift York  talk to  Manual Handling Solutions, Goods Lifts

Enquiry Form



More News

Goods Lift with Trained Attendant London

Goods Lift with Trained Attendant London

Goods Lift with Trained Attendant London; Goods Lift, carriage of goods and trained operator rated at 1000kg SWL capacity with a travel height 3950mm ...

Read More
Goods Lifts York

Goods Lifts York

Custom built 400kg single mast hydraulic Goods Lift with 90° loading installed York North Yorkshire with a finished floor level 3390mm and platform si...

Read More
Goods Lift Manchester

Goods Lift Manchester

Goods Lift, with maximum working load 250kg, enclosed in a self-supporting mesh shaft. The platform will be 1000mm x 700mm and guarded 900mm high on t...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: