search

External Goods Lifts Galvanised

External Goods Lifts Galvanised
03/02/2021

External Goods Lifts Galvanised External galvanised pit installed 3 stop goods lift 1000kg with finished floor levels 3900mm and 6350mm with a platform size 1820mm x 1150mm fitted with 1100mm high infilled panels on the non-loading sides and twin opening interlocked gates installed Looe Harbour Cornwall

The lift structure is self-supporting and manufactured from 150mm x 150mm box section steel with mesh infilled galvanised panels. At the lower level entry can be accessed from either side while the upper levels are single entry. Goods lift fitted with 2000mm high single loading doors cladded with a Perspex viewing panel at ground and first floor only, the upper level fitted with half height door. Each entry is fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the support structure is 7651mm.

Galvanised Goods Lift supplied with safety shoot bolts which allows for the operator to enter the lift platform safely while the lift is docked at the upper levels, the shoot bolts also eliminates any flex in the platform during loading and unloading. “Press to Go” one touch controls with emergency stop at each entry levels fitted as standard.

The power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm with is located internally of the building. Electrics 3 phase, 400v, 3Kw control voltage 24 volt IP67.

General Specification • Emergency lowering system when power is cut off • Pre wired control box included magnetic starter and overload fuse • Upper level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks • Control points are fitted to both ground and upper floor levels • The hydraulic power pack and electrical system housed separately at ground level • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor

Installation; Looe Harbour Cornwall

For a quotation please contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/ http://goods-lifts.com http://www.goodslift.co.uk/

Enquiry Form



More News

Bay Lift, Baylifts UK London Home Counties

Bay Lift, Baylifts UK London Home Counties

Bay Lift installed for Lamb Weston Meijer (UK) Ltd, Weasenham Lane, Wisbech, Cambs, PE13 2RN Bay Lift, with maximum working load 1000kg, mounted to t...

Read More
Goods Lift Edinburgh Scotland

Goods Lift Edinburgh Scotland

Goods Lift Edinburgh Scotland with maximum working load 250kg, enclosed in a self-supporting mesh shaft. The platform will be 1350mm x 1250mm and guar...

Read More
Goods Lift Ipswich Suffolk UK

Goods Lift Ipswich Suffolk UK

Goods Lift Ipswich Suffolk, At the entrance to the lift at both levels there will be 2250mm high gates, which will be fitted with electrical interlock...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: