search

Bespoke Manufactured Goods Lifts

Bespoke Manufactured Goods Lifts
26/04/2021

Bespoke Manufactured Goods Lifts Single column custom made through car hydraulic Mezzanine Goods Lift 500kg capacity installed Armada Way Beckton, London, E6 7AB with a finished floor level 3500mm and a platform size 1300mm x 1300mm fitted with 1100mm high infilled panels on the non-loading sides and single opening interlocked gate finished in Traffic Red RAL 3020.

A self-supporting lift structure manufactured from 100mm x 100mm box section steel with clad infilled panels Grey RAL 7024. Goods lift fitted with 2000mm high single loading door cladded with a Perspex viewing panel at each level and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper-level structure is 2250mm. “Press to Go” one touch controls with emergency stop at both levels fitted as standard.

At the lower level, a fixed ramp 1250mm long x 1380mm wide will be provided to assist loading on to the 120mm deep platform finished Red RAL 3020

To prevent damage from pallet trucks and forklift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm.

General Specification • Emergency lowering system when power is cut off. • Prewired control box included magnetic starter and overload fuse. • Upper-level travel limit switch and overload relief valve. • Hydraulic cylinders feature emergency velocity fuse if line breaks. • Control points are fitted to both ground and upper floor levels. • The hydraulic power pack and electrical system housed separately at ground level. • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor. • Electrics 3 phase, 400v, 1.5Kw • Control voltage 24-volt IP55.

Installation; (2nd Lift) Armada Way, Beckton, London, E6 7AB

For a quotation contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/ http://goods-lifts.com http://www.goodslift.co.uk/

mezzlift #mezzlifts #goodslifts #goodslift #mezzaninegoodslifts #mezzaninefloors #manualhandlingsolutions #mezzanine

Mezz Floor Goods Lifts covering, Canary Wharf, Deptford, Poplar, Leyton, Manor Park, Bow, Bethnal Green

Enquiry Form



More News

Goods Lift Plymouth Cornwall

Goods Lift Plymouth Cornwall

Goods Lift Plymouth Cornwall with Capacity 3000Kg EDL Goods Only; Lift Stroke 3200mm available limited to the required height of approx. 2500mm using ...

Read More
Goods Lift Bracknell Berkshire

Goods Lift Bracknell Berkshire

Goods Lift Bracknell Berkshire, with maximum working load 250kg, fully enclosed in a self supporting mesh shaft. Lift height floor to floor 3240mm. Th...

Read More
Goods Lift Sheffield

Goods Lift Sheffield

Goods Lift single mast installed Sheffield with a lift capacity 1000kg and a clear platform size 1500mm x 1500mm, finished floor level 2904mm. Lift pl...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: