search

Bespoke Goods Lifts Leeds

Bespoke Goods Lifts Leeds
29/07/2020

Bespoke Goods Lifts Leeds

Bespoke hydraulic Goods Lift 300kg single entry with a single mast installed in a stairwell to service a canteen, Knowsthorpe Way, Cross Green Industrial Estate, Leeds, LS9 0SW with a finished floor level 3620mm and a platform size 1080mm x 1030mm fitted with 1100mm high infilled panels on the non-loading sides and single opening interlocked gate finished in Traffic Red RAL 3020

A self-supporting lift structure manufactured from 80mm x 80mm box section steel with clad infilled panels Grey RAL 7024. Goods lift fitted with 2000mm high single loading doors cladded with a Perspex viewing panel at each level and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level structure is 2290mm. “Press to Go” one touch controls with emergency stop at both levels fitted as standard.

Due to the tight location and access through the area the lift was put into an 85mm pit formed by others.

To prevent damage from pallet trucks and fork lift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 1.5Kw control voltage 24 volt IP55.

General Specification • Emergency lowering system when power is cut off • Pre wired control box included magnetic starter and overload fuse • Upper level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks • Control points are fitted to both ground and upper floor levels • The hydraulic power pack and electrical system housed separately at ground level • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor

Installation; Knowsthorpe Way, Cross Green Industrial Estate, Leeds, LS9 0SW

Manual Handling Solutions offer a versatile range of hydraulic goods lifts they have been designed and manufactured to offer simple, economical and reliable solution to heavy lifting problems for a variety of applications, including warehouses, industries, supermarkets, restaurants, hotels, hospitals, private residences and office buildings. A goods lift from Manual Handling Solutions is a cost effective solution to transport bulky or heavy items in your commercial application. Health and Safety obligations dictate that you must provide a safe and injury free work place – a Goods Lift can eliminate the need for your staff in carrying heavy, awkward loads up flights of stairs. We can custom design a goods lift system to specifically meet your needs.

If you have any questions about our goods lifts, or would like assistance with finalising your goods lift design, Manual Handling Solutions are available to answer any queries you may have. We’re happy to talk you through our diverse range of bespoke goods lifts and how they can help with the ups and downs of your business. Contact us today to obtain a free custom quote or general advice.

Goods Lift covering, Batley, Cleckheaton, Tadcaster, Snaith, Selby, Huddersfield

For a quotation please contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/ http://goods-lifts.com http://www.goodslift.co.uk/

goodslifts #goodslift #mezzaninegoodslifts #mezzaninefloors #manualhandlingsolutions #mezzanines #selfstorage

Enquiry Form



More News

500kg Mezz Goods Lift Greater Manchester

500kg Mezz Goods Lift Greater Manchester

Mezz Goods Lift Greater Manchester, Mezz Goods Lift, with maximum working load 500kg, enclosed in a self-supporting mesh shaft. Platform will be 1500m...

Read More
Mezzanine Goods Lifts Melbourn

Mezzanine Goods Lifts Melbourn

Mezzanine Goods Lifts Melbourn Bespoke 2 stop single column 400kg hydraulic Mezzanine Floor Goods Lift installed Saxon Way, Melbourn, Royston SG8 6DN ...

Read More
Loading Bay Equipment

Loading Bay Equipment

Loading Bay Lifts , Somerset Loading Bay Lift TYPE TR-BD-40058 / TLX-50/160-4C with a SWL 3000kg, platform size 2850mm long x 1600mm wide, with smooth...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: