search

Bespoke Goods Lifts Beckton

Bespoke Goods Lifts Beckton
29/07/2020

Bespoke hydraulic single mast Goods Lift 500kg installed Armada Way Beckton, London. Finished floor level 3500mm and a platform size 1300mm x 1300mm fitted with 1100mm high infilled panels on the non-loading sides and single opening interlocked gate finished in Traffic Red RAL 3020

A self-supporting lift structure manufactured from 100mm x 100mm box section steel with clad infilled panels Grey RAL 7024. Goods lift fitted with 2000mm high single loading doors cladded with a Perspex viewing panel at each level and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level structure is 2250mm. “Press to Go” one touch controls with emergency stop at both levels fitted as standard.

At the lower level a fixed ramp 1250mm long x 1380mm wide will be provided to assist loading on to the 120mm deep platform finished Red RAL 3020

To prevent damage from pallet trucks and fork lift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 1.5Kw control voltage 24 volt IP55.

General Specification • Emergency lowering system when power is cut off • Pre wired control box included magnetic starter and overload fuse • Upper level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks • Control points are fitted to both ground and upper floor levels • The hydraulic power pack and electrical system housed separately at ground level • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor • Loaded and unloaded with hand pallet trucks

Installation; Armada Way, Beckton, London, E6 7AB

Custom designed Goods Lifts the perfect solution to multi-floor transportation of equipment and goods, reducing the risk to employees, increasing efficiency and ultimately improving the bottom line. The goods lift range is fully bespoke to fit all shapes and sizes of goods.

For a quotation please contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/ http://goods-lifts.com http://www.goodslift.co.uk/

goodslifts #goodslift #mezzaninegoodslifts #mezzaninefloors #manualhandlingsolutions #mezzanines #selfstorage

Enquiry Form



More News

Mezzanine Goods Lifts Tamworth

Mezzanine Goods Lifts Tamworth

Mezzanine Goods Lifts Tamworth Bespoke double column 2000kg hydraulic Mezzanine Goods Lift with single entry installed Centurion Point, Trinity Road, ...

Read More
Loading Bay Lifts UK

Loading Bay Lifts UK

Loading Bay Lifts UK - TYPE TR-BD-40058 / TLX-50/160-4C with a SWL 3000kg, platform size 2850mm long x 1600mm wide, with smooth top plate. Lift stroke...

Read More
Mezzanine Goods Lift

Mezzanine Goods Lift

Mezzanine Goods Lift installed Elstree Hertfordshire with maximum working load 250kg, enclosed in a self-supporting mesh shaft. Platform size 1300mm x...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: