search

Bespoke Goods Lift Slough

Bespoke Goods Lift Slough
03/02/2021

Bespoke Goods Lift Slough Custom designed hydraulic 4000kg 2 stop twin mast goods lift installed in a 200mm pit with a finished floor level 7970mm installation Slough, Berkshire. Platform size 2120mm x 4495mm fitted with a fully enclosed stainless steel cabin 2500mm high with LED lighting. The lift structure is self-supporting and manufactured from 200mm x 200mm box section steel with clad infilled panels.

Goods lift fitted with 2500mm high twin loading doors cladded with perspex viewing panels and the doors are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the support structure is 11050mm.

Goods Lift supplied with safety shoot bolts which allows for the operator to enter the lift platform safely while the lift is docked at the upper levels, the shoot bolts also eliminates any flex in the platform during loading and unloading. “Press to Go” one touch controls with emergency stop at each entry levels fitted as standard.

The power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm with is located internally of the building. Electrics 3 phase, 400v, 15Kw control voltage 24 volt IP55.

General Specification • Emergency lowering system when power is cut off • Pre wired control box included magnetic starter and overload fuse • Upper level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks • Control points are fitted to both ground and upper floor levels • The hydraulic power pack and electrical system housed separately at ground level • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor

Installation; Cambridge Avenue, Slough, Berkshire SL1 4QB

For a quotation please contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://www.manualhandlingsolutions.co.uk http://goodslift.website/ http://goods-lifts.com http://www.goodslift.co.uk/

Enquiry Form



More News

5000kg Loading Bay Lift Nottingham

5000kg Loading Bay Lift Nottingham

Loading Bay Lift based on Static Scissor Lift 5000kg partially concentrated load to accommodate a fork lift truck delivered and installed Colwick Nott...

Read More
The BOXlift Pro Goods Lift Trained Attendant

The BOXlift Pro Goods Lift Trained Attendant

The BOXlift Pro Goods Lift Trained Attendant freestanding designed to allow for two trained competent attendants to accompany the freight / goods safe...

Read More
Mezzanine Goods Lift 1000kg

Mezzanine Goods Lift 1000kg

Mezzanine Goods Lift 1000kg in a self-supporting cladded panel structure comprised of infilled sheet steel clad panels painted Dark Grey RAL 7024. Wit...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: