search

BayLift London Stansted Airport

BayLift London Stansted Airport
27/03/2016

BayLift London Stansted Airport; Bay-Lift, with maximum working load 500kg, Floor to Floor 1520mm, enclosed in a self-supporting mesh shaft. The platform will be 1700mm x 900mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed. At the lower level a 300mm long folding ramp will be provided to assist loading on to the 50mm deep platform. A 20 amp, 240 volt, single-phase supply is required terminated in a double pole switch at the lower level. Control is via a hold to run, push button control station adjacent to the gates at both levels. Goods Lift supplied CE Marked with Declaration of Conformity. Operation and Maintenance Manual issue on completion. LOLER Report of Thorough Examination and Test issued on commission. Operator training carried out on completion. Bay Lift supplied with a 12 months maintenance contract. The 12 months Statutory Inspections and maintenance ensures continued safe and reliable use of the equipment and full compliance with current legislation. In brief it comprises an annual service with thorough examination and test, a six-month inspection and test and all labour or callout charges.

For a quotation please contact; Manual Handling Solutions 58, Paige Close Watlington, King's Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://goodslift.website/

Enquiry Form



More News

Mezzanine Floor Goods Lifts - Manual Handling Solutions

Mezzanine Floor Goods Lifts - Manual Handling Solutions

Mezzanine Floor Goods Lifts - Manual Handling Solutions single mast installed East Sussex with a lift capacity 500kg and a clear platform size 1500mm ...

Read More
Goods Lift York

Goods Lift York

Custom design twin mast 2 stop through car Goods Lift 1000kg installed York with a clear platform size 2500mm x 1500mm, finished floor level 3000mm. T...

Read More
Goods Lift Basildon Essex

Goods Lift Basildon Essex

Goods Lift Basildon Essex, with maximum working load 500kg, enclosed in a self-supporting mesh shaft. The platform will be 1480mm x 1680mm and guarded...

Read More

Read More

Read More

List your business

Would you like to register your company on one of the UK's largest and most effective Trade websites?

Are you looking for a reliable and consistent source of enquiries from your industry sector? Would you like to see why Find the Needle clients come back year after year to use our service? If so then feel free to register using the link 'here'.

Register
Office Address: