Get Listed
Sign In
New Dynamic Load Applications Brochure
18/04/2024
Written by: Damian Haigh
18/04/24 - 3 Min read
Lindapter announce the launch of their new brochure �Solutions for Dynamic Load Applications�.
Lindapter provides a unique range of approved steelwork solutions for overcoming challenging connections between steel members. Our products are used extensively around the world and are the practical solution for applications that have Dynamic Loads.
This brochure provides examples of connections between steel members using Products manufactured by Lindapter in many different applications. The products shown have been independently tested and approved for use in Dynamic Load applications so you can be confident of specifying them on your next project.
Lindapter has gained ETA / CE Mark approval of its Type AF and Type AAF Girder Clamps for use in dynamic loading applications. This development extends the range of approved options available to Engineers when designing dynamic connections to Eurocode 3, which also includes Types A and B Girder Clamps. Dynamic loading capacities for these products have been published in Lindapter's Declaration of Performance documents.
These latest third party approvals are alongside independent dynamic load testing commissioned by Lindapter for its Hollo-Bolt, Type AF and Type AAF products to offer specifiers an economic and technically improved connection compared to welding or through bolting for dynamic load applications.
The independent tests were performed in accordance with EN 1993-1-9: Design of steel structures - Part 1-9: Fatigue. A number of tests were performed at different load levels from 10,000 to 2.5 million cycles to determine suitable detail categories. The results from the testing were then used to calculate Safe Working Loads (such as a Factor of Safety).
The new brochure explains further the steelwork clamping concept, principal advantages, the free engineering guidance and support services available from Lindapter, examples of typical applications, an in-depth project case study featuring Berlin Bridge and information regarding independent product approvals.
Featured in the brochure are typical applications showing connection solutions for:
Conveyor Systems Cranes and Crane Rails Bridges & Bridge Refurbishment Material Handling Systems Hoists & Lifting Equipment
Each section includes a real-life project photograph, description of the solution and 3D and 2D drawings so the reader can quickly understand and visualise the application and relate it to their own situation.
To find out more about Solutions developed by Lindapter for Dynamic Load Applications please click here to download the brochure or email marketing@Lindapter.com to order a hard copy.
18/04/24 - 3 Min read
Lindapter announce the launch of their new brochure �Solutions for Dynamic Load Applications�.
Lindapter provides a unique range of approved steelwork solutions for overcoming challenging connections between steel members. Our products are used extensively around the world and are the practical solution for applications that have Dynamic Loads.
This brochure provides examples of connections between steel members using Products manufactured by Lindapter in many different applications. The products shown have been independently tested and approved for use in Dynamic Load applications so you can be confident of specifying them on your next project.
Lindapter has gained ETA / CE Mark approval of its Type AF and Type AAF Girder Clamps for use in dynamic loading applications. This development extends the range of approved options available to Engineers when designing dynamic connections to Eurocode 3, which also includes Types A and B Girder Clamps. Dynamic loading capacities for these products have been published in Lindapter's Declaration of Performance documents.
These latest third party approvals are alongside independent dynamic load testing commissioned by Lindapter for its Hollo-Bolt, Type AF and Type AAF products to offer specifiers an economic and technically improved connection compared to welding or through bolting for dynamic load applications.
The independent tests were performed in accordance with EN 1993-1-9: Design of steel structures - Part 1-9: Fatigue. A number of tests were performed at different load levels from 10,000 to 2.5 million cycles to determine suitable detail categories. The results from the testing were then used to calculate Safe Working Loads (such as a Factor of Safety).
The new brochure explains further the steelwork clamping concept, principal advantages, the free engineering guidance and support services available from Lindapter, examples of typical applications, an in-depth project case study featuring Berlin Bridge and information regarding independent product approvals.
Featured in the brochure are typical applications showing connection solutions for:
Conveyor Systems Cranes and Crane Rails Bridges & Bridge Refurbishment Material Handling Systems Hoists & Lifting Equipment
Each section includes a real-life project photograph, description of the solution and 3D and 2D drawings so the reader can quickly understand and visualise the application and relate it to their own situation.
To find out more about Solutions developed by Lindapter for Dynamic Load Applications please click here to download the brochure or email marketing@Lindapter.com to order a hard copy.
For more information on New Dynamic Load Applications Brochure talk to Lindapter International
Welcome back to FindTheNeedle.
Not registered? Get listed — most visitors don't have an account yet.
List your company on FindTheNeedle.