Sunspring Heat Pump 5kw to 12kw for Above Ground Swimming Pool Heater for Summer Use May to Sep 5kw

Sunspring Heat Pump 5kw to 12kw for Above Ground Swimming Pool Heater for Summer Use 1. Description SunSpring Heat Pump are Designed for Above Ground Swimming Pools – Plug and Play!They are quick to setup and remove in the winterComes complete with 3.5m cable and UK 13A plug/RCD and also flexible hose connections so you can be up and running to heat your pool in no time!(We can also supply these with an EU 2-pin plug/RCD if required) SunSpring 5kw/8kw SunSpring 12kw Easy to Operate – Sunspring Heat Pump The SunSpring swimming pool heat pumps have a user friendly colour digital display panelThe display panel has three buttons for easy operationThe display has a unique water flow indicator scale to instantly show the water flow rate through the heat pump so that you can be sure that it is sufficient.The display shows the current pool temperature and the set temperature. Sunspring Heat Pump is Fitted with UK or Euro Plug All of our Sunspring heat pumps are fitted with a UK 3-pin 13A mains plug/RCD. We can also supply them with a 2-pin euro plug on request Comes with UK 3-pin plug/RCD (shown above for models sold before June 2024) Comes with UK 3-pin plug/RCD (shown above for models sold after June 2024) If your outdoor socket is already protected by an RCD, then if you prefer, the fitted RCD/Plug can be unwired and replaced with a standard UK 13A plug. Note: The Sunspring heat pumps require a 230v, 50hz power supply and therefore are not suitable for use in the USA/Canada (which uses a 110v, 60hz power supply) Hose and Solid Pipe Connections Included with the Sunspring Heat Pump The SunSpring models come with hose tails to take both 1.25″ (32mm) and 1.5″ (38mm) flexible hoses.They also include the connectors for 50mm and 1.5″ solid pipework Water Flow Rates Please check that your existing pump and filter will deliver the flow rate required for the SunSpring heat pump.If your pump and filter are too small, then we sell the Krystal Clear pump and filter sets with higher flow rates to suit the SunSpring heat pumps Please Click Here to see pricing for these pump and filter sets Sunspring 7 heat pump Sunspring 7 2. Features Plug and play with fitted cable, UK 13A 3-pin (or Euro 2-pin if preferred) plug and RCD Specially designed for small and medium Pools (thin wall pools, polyester, metal or wooden wall pools <35m3) Comes with hose tail connections to allow easy connection of flexible pool hose for above ground pools. Includes stepped hose tails to accept both 1.5″ (38mm) or 1.25″ (32mm) pool hose. Also includes glue socket connectors for 50mm and 1.5″ solid pool pipe. Will continue to function even at low flow rates Can be used with sand or cartridge filters Requires an air temperature of +8°C and above to operate An exceptionally high COP value (5) for such a small compact heat pump. Easy and fast to install (<15 min). Plug and play User friendly, easy to use colour display with 3 buttons Water flow scale to show water flow rate through the heat pump Safety RCD protection and UK or Euro plug – Plug & play Comes with long 3.5m power cable Using sustainable materials (UV resistant Polymer casing and titanium heat exchanger) Full Flow Technology –  No Bypass needed Uses R32 refrigerant gas for an environmentally friendly operation Plastic rust-resistant polymer casing Note: The Sunspring units do not have a built in flow switch and so must not be allowed to run with no water running through them. We sell a time clock which can be used to turn the unit on/off at specific times if required. 3. Sizing & Models Please use the chart below to select the best SunSpring heat pump model for your pool Model Output Kw Max Pool Volume SunSpring 5kw 5kw 12m3 SunSpring 8kw 8.1kw 22m3 SunSpring 12kw 12.2kw 35m3 However please note that these are the maximum sizes.You should always oversize a heat pump, so we recommend that you choose the next model up in the sizing chart.If in doubt about the model required for your pool, then please contact us and we will be happy to assist How to Calculate Your pool Water Volume You can easily calculate the water volume in your pool as follows:-Round PoolsTo calculate the volume of a round pool, you can use the formulaPool Volume = 3.14 x radius x radius x depth Measure the diameter of the pool in metres Half the diameter to give the radius of the pool Multiply 3.14 x radius x radius x pool depth ExampleA 12′ (3.66 m) diameter round above ground pool with a depth of 0.8mDiameter = 12′ x 0.305 = 3.66mRadius = 3.66 / 2 = 1.83mVolume = 3.14 x 1.83 x 1.83 x 0.8m = 8.4 m3 The SunSpring 5kw supports pools up to 12m3 so would be OK for this pool, as we always allow a 20% difference in the pool volume in the pool and what volume the heat pump can cope with.We always recommend going up in size when choosi

For more information on Sunspring Heat Pump 5kw to 12kw for Above Ground Swimming Pool Heater for Summer Use May to Sep 5kw talk to HeatPumps4Pools Ltd