Koi Pond Winter Covers Save Money on Heating Bills by covering your Koi Pond 2 x 3 m

Koi Pond Winter Covers 1. Description HeatPumps4Pools have an excellent range of made-to-measure Koi Pond Winter Covers.We can make Save Money on Heating Bills by covering your Koi Pond to any size for koi ponds.Our covers are custom designed for koi ponds and span above the water surface to allow for transfer of gases from the water.They can be supported over their span by either timber or our support straps (see below)The 500 Micron Solar-Weave fabric allows the light through whilst the heat from the sun transfers from the bubbles into the layer of air underneath the pondcover to provide heat and solar gain from the sun. It also stops heat loss from rising into the atmosphere, in the cold weather. made to size ** please note that covers over 5.8m in length will be charged additional shipping for special haulage delivery charges as this size package can not be sent by normal couriers. POA With Ratchet straps, Feeding Flap & Bungee for a koi pond (foam supplied by customer) Feeding flap shown at this end which is re-sealed with velcro tostop the wind blowing the flap open. Customer Example: October 2019 – Solarweave Koi Pond Winter Covers made to size: Beautiful oval koi pond Feeding flap shown at the far end which is re-sealed with velcro tostop the wind blowing the flap open.This cover has been made with fitted straps and anchor bolts as shown 1. Other Solarweave Koi Pond Winter Covers made to size: Pond cover with eyelets, anchor bolts and continuous bungee for fixing Pond cover with adjustable straps and anchor bolts for fixing 3. Super Strong Solar-Weave Fabric on the Koi Pond Winter Covers Our pond covers are made from strong Solar-Weave fabric which can be tensioned without tearing.The fabric has a reinforced mesh on the top side and solar bubbles on the undersideThe cover allows light through to the pond. The solar bubbles transfer the sun’s heat to the layer of air underneath the pond cover to provide heat and solar gain from the sun. The edges of the cover are hemmed to give it strength and to prevent tearing.   NEW: Note that our pond covers are now made from GeoBubble material which gives it extra strength and durability 4. We can offer a choice of two types of fixings to hold the cover in place on the Koi Pond Winter Covers:-  Eyelets and Continuous Elastic Bungee Eyelets are positioned around the edge of the cover.The edges of the cover are sewn and reinforced to prevent the eyelets tearing out.A continuous elastic “bungee” is then passed around the cover through the eyelets.The elastic is then hooked over wall fixings at various positions around the pond.This elastic fixing method gives some flexibility to the cover in windy conditions to prevent the cover from tearing.The continuous elastic strap also allows for varying heights of the fixing bolts around the pond. Anchor Bolts for brickwork Low profile anchor bolts for wood The covers come with a choice of anchor bolts which can be fixed into brickwork/masonry or decking low profile anchor bolts for the use with wood. When the rectrable anchor bolts are used and the cover is removed for summer, the centre of the anchor bolt can be screwed in so it is flushWhen the covers is fitted, the centre is unscrewed so it protrudes allowing the bungee to be hooked over it.  Sewn Straps Instead of eyelets and an elastic strap fixing. we can provide straps sewn onto the edges of the cover.The straps are blue, 25mm wide and come with buckle, D-ring and brass flush fix anchor bolt Straps are sewn to the hemmed edge of the cover. The strap length is adjustable.At the end of each strap is a D-ring.The D-ring is then hooked over the anchor bolts and the strap length adjusted.For larger pond covers, straps make it easier to fit the cover than a continuous bungee and eyelets. 5. Feeding Flap choice on the Koi Pond Winter Covers An optional feeding flap can be added to the cover to allow feeding the fish without removing the cover. This has Velcro fastenings.The feeding flaps are normally 300mm x 300mm but the size can be adjusted if required.The optional feeding flaps cost approximately £60 each inc VATThe feeding flap can be located up to 600mm from the edge of the cover Note: The feeding flaps must be located near to the edge of the cover  6. Fixing Anchors Our cover prices include retractable fixing anchors for inserting into brickwork etc.They require an 18mm hole to be drilled   The cover fixings or bungee then hook over the brickwork anchors to hold the cover in place.The centre piece of the fixing can be unscrewed so it protrudes, the bungee or d-ring is then hooked over the fixing.In the summer when the cover is removed, the centre piece can be screwed in so it is flush with the brickwork 7. Grass Stake We have a 500mm long ground stake for fixing into grass Please contact us for pricing and details of this option 8. Optional Support Ratchet Strap

For more information on Koi Pond Winter Covers Save Money on Heating Bills by covering your Koi Pond 2 x 3 m talk to HeatPumps4Pools Ltd